Two-dimensional magnetic recording using a rotated head array and LDPC code decoding

Yao Wang, Bo Yuan, Keshab K Parhi, Randall H Victora

Research output: Contribution to journalArticle

Abstract

This paper examines the improvement in performance of rotated and normally oriented heads by using the quasi-cyclic low-density parity-check (QC-LDPC) code in a two-dimensional magnetic recording (TDMR) system. This paper indicates that the significant improvement in performance in the rotated head compared to the normally oriented head can be attributed to the larger amplitude of its dibit response and the reduced overlap between conditional probability density functions. Simulation also indicates that maximum areal densities of 9.85 T/in{2} and 6.64 T/in{2} can be reached by the rotated head array (RHA) and normally oriented head array (NHA) at optimum bit aspect ratios of 0.67 and 3.5 for 5.5 nm Voronoi grains, respectively. After decoding, the performance of the NHA is about 8.5 dB worse than the RHA. With an oversampled signal, 2-D linear minimum mean-squared error (LMMSE) equalizer and LDPC codes, a user bit density near 10 Tbits/in{2} is feasible for a rotated head array.

Original languageEnglish (US)
Article number6971812
JournalIEEE Transactions on Magnetics
Volume50
Issue number11
DOIs
StatePublished - Nov 1 2014

Fingerprint

Magnetic recording
Decoding
Equalizers
Probability density function
Aspect ratio

Cite this

Two-dimensional magnetic recording using a rotated head array and LDPC code decoding. / Wang, Yao; Yuan, Bo; Parhi, Keshab K; Victora, Randall H.

In: IEEE Transactions on Magnetics, Vol. 50, No. 11, 6971812, 01.11.2014.

Research output: Contribution to journalArticle

@article{b4e952ecccd14cc594670396467836f5,
title = "Two-dimensional magnetic recording using a rotated head array and LDPC code decoding",
abstract = "This paper examines the improvement in performance of rotated and normally oriented heads by using the quasi-cyclic low-density parity-check (QC-LDPC) code in a two-dimensional magnetic recording (TDMR) system. This paper indicates that the significant improvement in performance in the rotated head compared to the normally oriented head can be attributed to the larger amplitude of its dibit response and the reduced overlap between conditional probability density functions. Simulation also indicates that maximum areal densities of 9.85 T/in{2} and 6.64 T/in{2} can be reached by the rotated head array (RHA) and normally oriented head array (NHA) at optimum bit aspect ratios of 0.67 and 3.5 for 5.5 nm Voronoi grains, respectively. After decoding, the performance of the NHA is about 8.5 dB worse than the RHA. With an oversampled signal, 2-D linear minimum mean-squared error (LMMSE) equalizer and LDPC codes, a user bit density near 10 Tbits/in{2} is feasible for a rotated head array.",
author = "Yao Wang and Bo Yuan and Parhi, {Keshab K} and Victora, {Randall H}",
year = "2014",
month = "11",
day = "1",
doi = "10.1109/TMAG.2014.2321147",
language = "English (US)",
volume = "50",
journal = "IEEE Transactions on Magnetics",
issn = "0018-9464",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "11",

}

TY - JOUR

T1 - Two-dimensional magnetic recording using a rotated head array and LDPC code decoding

AU - Wang, Yao

AU - Yuan, Bo

AU - Parhi, Keshab K

AU - Victora, Randall H

PY - 2014/11/1

Y1 - 2014/11/1

N2 - This paper examines the improvement in performance of rotated and normally oriented heads by using the quasi-cyclic low-density parity-check (QC-LDPC) code in a two-dimensional magnetic recording (TDMR) system. This paper indicates that the significant improvement in performance in the rotated head compared to the normally oriented head can be attributed to the larger amplitude of its dibit response and the reduced overlap between conditional probability density functions. Simulation also indicates that maximum areal densities of 9.85 T/in{2} and 6.64 T/in{2} can be reached by the rotated head array (RHA) and normally oriented head array (NHA) at optimum bit aspect ratios of 0.67 and 3.5 for 5.5 nm Voronoi grains, respectively. After decoding, the performance of the NHA is about 8.5 dB worse than the RHA. With an oversampled signal, 2-D linear minimum mean-squared error (LMMSE) equalizer and LDPC codes, a user bit density near 10 Tbits/in{2} is feasible for a rotated head array.

AB - This paper examines the improvement in performance of rotated and normally oriented heads by using the quasi-cyclic low-density parity-check (QC-LDPC) code in a two-dimensional magnetic recording (TDMR) system. This paper indicates that the significant improvement in performance in the rotated head compared to the normally oriented head can be attributed to the larger amplitude of its dibit response and the reduced overlap between conditional probability density functions. Simulation also indicates that maximum areal densities of 9.85 T/in{2} and 6.64 T/in{2} can be reached by the rotated head array (RHA) and normally oriented head array (NHA) at optimum bit aspect ratios of 0.67 and 3.5 for 5.5 nm Voronoi grains, respectively. After decoding, the performance of the NHA is about 8.5 dB worse than the RHA. With an oversampled signal, 2-D linear minimum mean-squared error (LMMSE) equalizer and LDPC codes, a user bit density near 10 Tbits/in{2} is feasible for a rotated head array.

UR - http://www.scopus.com/inward/record.url?scp=84915818931&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84915818931&partnerID=8YFLogxK

U2 - 10.1109/TMAG.2014.2321147

DO - 10.1109/TMAG.2014.2321147

M3 - Article

AN - SCOPUS:84915818931

VL - 50

JO - IEEE Transactions on Magnetics

JF - IEEE Transactions on Magnetics

SN - 0018-9464

IS - 11

M1 - 6971812

ER -