Abstract
Objectives: The effect of shot blasting treatment on the cyclic deformation and fracture behavior of a commercial pure titanium with two different microstructures; equiaxed (α-phase) and acicular (martensitic α′-phase) was investigated. Methods: Fatigue tests were carried out in artificial saliva at 37 °C. Cyclic deformation tests were carried out up to fracture and fatigue crack nucleation and propagation were analysed. Residual stresses were determined by means of X-ray diffraction. Results: The results show that shot blasting treatment improves fatigue life in the different microstructures studied. The equiaxed phase has improved mechanical properties compared to the acicular one. Despite the fact that control of the variables of shot blasting is not precise because of the nature of the treatment, it improves the fatigue life by the fact that the initiation site of the fatigue crack changes from the surface of the specimen to the interior of the shot blasted specimen. This is a consequence of the layer of compressive residual stresses that the treatment generates on titanium surfaces. The acicular morphology of the martensite favors crack propagation along the interface of the α′ plates. Significance: Shot blasting, which is widely used on titanium dental implants in order to favour their osseointegration, can also improve their fatigue resistance.
| Original language | English (US) |
|---|---|
| Pages (from-to) | 486-491 |
| Number of pages | 6 |
| Journal | Dental Materials |
| Volume | 23 |
| Issue number | 4 |
| DOIs | |
| State | Published - Apr 2007 |
Bibliographical note
Funding Information:The authors are grateful to the CICYT for funding the present work through project MAT2003-08165 and to Klockner, S.A. for kindly donating the material.
Keywords
- Dental implants
- Fatigue resistance
- Residual stresses
- Shot blasting
- Titanium