Textures in experimentally deformed olivine aggregates

The effects of added water and melt

F. Heidelbach, B. Holtzman, S. Hier-Majumder, David L Kohlstedt

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

The texture development in experimentally sheared aggregates of olivine was monitored as a function of increased water content and added melt. In dry samples, an alignment of {010} with the shear plane and 〈100〉 and 〈001〉 with the shear direction, respectively, was observed, consistent with intracrystalline glide on the (010)[100] and (010)[001] slip systems. Samples with high water content showed consistently stronger textures of the (010)[100] component for comparable shear strains indicating that water may especially ease glide on this slip system. Samples with added melt showed an increased alignment of {010} and 〈001〉 subparallel to shear plane and shear direction respectively, whereby the maxima were consistently rotated 10 to 20° against the sense of shear. This type of texture can be explained by a combination of increased glide on the (010)[001] slip system in combination with a partitioning of the strain between melt rich bands and relatively melt free regions in the sample. Physical anisotropies calculated from the textures indicate that increased water content causes enhanced anisotropy for longitudinal and transverse seismic waves. The addition of melt on the other hand may change the type of anisotropy that develops during deformation, but does not significantly change the magnitude of anisotropy compared to samples of pure olivine.

Original languageEnglish (US)
Title of host publicationTextures of Materials, ICOTOM 14 - Proceedings of the 14th International Conference on Textures of Materials
Pages63-68
Number of pages6
EditionPART 1
StatePublished - Dec 1 2005
Event14th International Conference on Textures of Materials, ICOTOM 14 - Leuven, Belgium
Duration: Jul 11 2005Jul 15 2005

Publication series

NameMaterials Science Forum
NumberPART 1
Volume495-497
ISSN (Print)0255-5476

Other

Other14th International Conference on Textures of Materials, ICOTOM 14
CountryBelgium
CityLeuven
Period7/11/057/15/05

Fingerprint

Olivine
Anisotropy
Textures
Water content
Water
Seismic waves
Shear strain
olivine
Direction compound

Keywords

  • Deformation
  • Melt
  • Olivine
  • Seismic anisotropy
  • Stress
  • Texture
  • Water

Cite this

Heidelbach, F., Holtzman, B., Hier-Majumder, S., & Kohlstedt, D. L. (2005). Textures in experimentally deformed olivine aggregates: The effects of added water and melt. In Textures of Materials, ICOTOM 14 - Proceedings of the 14th International Conference on Textures of Materials (PART 1 ed., pp. 63-68). (Materials Science Forum; Vol. 495-497, No. PART 1).

Textures in experimentally deformed olivine aggregates : The effects of added water and melt. / Heidelbach, F.; Holtzman, B.; Hier-Majumder, S.; Kohlstedt, David L.

Textures of Materials, ICOTOM 14 - Proceedings of the 14th International Conference on Textures of Materials. PART 1. ed. 2005. p. 63-68 (Materials Science Forum; Vol. 495-497, No. PART 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heidelbach, F, Holtzman, B, Hier-Majumder, S & Kohlstedt, DL 2005, Textures in experimentally deformed olivine aggregates: The effects of added water and melt. in Textures of Materials, ICOTOM 14 - Proceedings of the 14th International Conference on Textures of Materials. PART 1 edn, Materials Science Forum, no. PART 1, vol. 495-497, pp. 63-68, 14th International Conference on Textures of Materials, ICOTOM 14, Leuven, Belgium, 7/11/05.
Heidelbach F, Holtzman B, Hier-Majumder S, Kohlstedt DL. Textures in experimentally deformed olivine aggregates: The effects of added water and melt. In Textures of Materials, ICOTOM 14 - Proceedings of the 14th International Conference on Textures of Materials. PART 1 ed. 2005. p. 63-68. (Materials Science Forum; PART 1).
Heidelbach, F. ; Holtzman, B. ; Hier-Majumder, S. ; Kohlstedt, David L. / Textures in experimentally deformed olivine aggregates : The effects of added water and melt. Textures of Materials, ICOTOM 14 - Proceedings of the 14th International Conference on Textures of Materials. PART 1. ed. 2005. pp. 63-68 (Materials Science Forum; PART 1).
@inproceedings{840eb6e26bfc4d909cc7d09e12f258d5,
title = "Textures in experimentally deformed olivine aggregates: The effects of added water and melt",
abstract = "The texture development in experimentally sheared aggregates of olivine was monitored as a function of increased water content and added melt. In dry samples, an alignment of {010} with the shear plane and 〈100〉 and 〈001〉 with the shear direction, respectively, was observed, consistent with intracrystalline glide on the (010)[100] and (010)[001] slip systems. Samples with high water content showed consistently stronger textures of the (010)[100] component for comparable shear strains indicating that water may especially ease glide on this slip system. Samples with added melt showed an increased alignment of {010} and 〈001〉 subparallel to shear plane and shear direction respectively, whereby the maxima were consistently rotated 10 to 20° against the sense of shear. This type of texture can be explained by a combination of increased glide on the (010)[001] slip system in combination with a partitioning of the strain between melt rich bands and relatively melt free regions in the sample. Physical anisotropies calculated from the textures indicate that increased water content causes enhanced anisotropy for longitudinal and transverse seismic waves. The addition of melt on the other hand may change the type of anisotropy that develops during deformation, but does not significantly change the magnitude of anisotropy compared to samples of pure olivine.",
keywords = "Deformation, Melt, Olivine, Seismic anisotropy, Stress, Texture, Water",
author = "F. Heidelbach and B. Holtzman and S. Hier-Majumder and Kohlstedt, {David L}",
year = "2005",
month = "12",
day = "1",
language = "English (US)",
isbn = "087849975X",
series = "Materials Science Forum",
number = "PART 1",
pages = "63--68",
booktitle = "Textures of Materials, ICOTOM 14 - Proceedings of the 14th International Conference on Textures of Materials",
edition = "PART 1",

}

TY - GEN

T1 - Textures in experimentally deformed olivine aggregates

T2 - The effects of added water and melt

AU - Heidelbach, F.

AU - Holtzman, B.

AU - Hier-Majumder, S.

AU - Kohlstedt, David L

PY - 2005/12/1

Y1 - 2005/12/1

N2 - The texture development in experimentally sheared aggregates of olivine was monitored as a function of increased water content and added melt. In dry samples, an alignment of {010} with the shear plane and 〈100〉 and 〈001〉 with the shear direction, respectively, was observed, consistent with intracrystalline glide on the (010)[100] and (010)[001] slip systems. Samples with high water content showed consistently stronger textures of the (010)[100] component for comparable shear strains indicating that water may especially ease glide on this slip system. Samples with added melt showed an increased alignment of {010} and 〈001〉 subparallel to shear plane and shear direction respectively, whereby the maxima were consistently rotated 10 to 20° against the sense of shear. This type of texture can be explained by a combination of increased glide on the (010)[001] slip system in combination with a partitioning of the strain between melt rich bands and relatively melt free regions in the sample. Physical anisotropies calculated from the textures indicate that increased water content causes enhanced anisotropy for longitudinal and transverse seismic waves. The addition of melt on the other hand may change the type of anisotropy that develops during deformation, but does not significantly change the magnitude of anisotropy compared to samples of pure olivine.

AB - The texture development in experimentally sheared aggregates of olivine was monitored as a function of increased water content and added melt. In dry samples, an alignment of {010} with the shear plane and 〈100〉 and 〈001〉 with the shear direction, respectively, was observed, consistent with intracrystalline glide on the (010)[100] and (010)[001] slip systems. Samples with high water content showed consistently stronger textures of the (010)[100] component for comparable shear strains indicating that water may especially ease glide on this slip system. Samples with added melt showed an increased alignment of {010} and 〈001〉 subparallel to shear plane and shear direction respectively, whereby the maxima were consistently rotated 10 to 20° against the sense of shear. This type of texture can be explained by a combination of increased glide on the (010)[001] slip system in combination with a partitioning of the strain between melt rich bands and relatively melt free regions in the sample. Physical anisotropies calculated from the textures indicate that increased water content causes enhanced anisotropy for longitudinal and transverse seismic waves. The addition of melt on the other hand may change the type of anisotropy that develops during deformation, but does not significantly change the magnitude of anisotropy compared to samples of pure olivine.

KW - Deformation

KW - Melt

KW - Olivine

KW - Seismic anisotropy

KW - Stress

KW - Texture

KW - Water

UR - http://www.scopus.com/inward/record.url?scp=35348843422&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=35348843422&partnerID=8YFLogxK

M3 - Conference contribution

SN - 087849975X

SN - 9780878499755

T3 - Materials Science Forum

SP - 63

EP - 68

BT - Textures of Materials, ICOTOM 14 - Proceedings of the 14th International Conference on Textures of Materials

ER -