Structural and magnetic properties of FePt film with Cu top layer diffusion

J. S. Chen, Jianping Wang

Research output: Contribution to journalArticlepeer-review

20 Scopus citations

Abstract

The top or bottom layer diffusion through grain boundary is believed to be one promising method for magnetic isolation. In the paper, the effects of the Cu top layer thickness and thus annealing time on the structural and magnetic properties of the FePt (0 0 1) film were investigated. The XPS in-depth profile shows that the diffusion is not through the whole film. The M-H loop slope decreased from 14.9 to 2.53 and the coercivity increased drastically from about 3100 to 6000 Oe when a 4 nm Cu capping layer was deposited, which indicates that the exchange coupling between the FePt grains was reduced. The magnetic anisotropy (Ku) firstly decreases from 1.54 × 107 to 1.12 × 107 erg/cm3 after the deposition 2 nm Cu top layer and remains almost constant with 4 nm Cu top layer. But the long time annealing will cause the significant decrease of the Ku due to the bulk lattice diffusion. The magnetic reversal process without Cu top layer is dominated by domain wall motion and tends to be rotation mode related to nucleation with the increase of the Cu top layer.

Original languageEnglish (US)
Pages (from-to)423-429
Number of pages7
JournalJournal of Magnetism and Magnetic Materials
Volume284
Issue number1-3
DOIs
StatePublished - Dec 1 2004

Keywords

  • Exchange coupling
  • FePt
  • Top layer diffusion

Fingerprint Dive into the research topics of 'Structural and magnetic properties of FePt film with Cu top layer diffusion'. Together they form a unique fingerprint.

Cite this