Skip to main navigation Skip to search Skip to main content

Strain compatibility and shear zones: Is there a problem?

  • Peter Hudleston

Research output: Contribution to journal › Article › peer-review

Abstract

In analyzing deformation in rocks, it is important to ensure that the solutions obtained satisfy strain compatibility. This creates a challenge to understanding patterns of strain associated with shear zones, in which measured strain may appear incompatible with the strain in the shear zone walls. Flattening strains are common in natural shear zones with locally straight and parallel boundaries: to satisfy compatibility conditions such strains require volume loss across the shear zone or deviations from plane strain, with or without discontinuities between the shear zone and the wall rock. In the case of shear zones for which there is no evidence of volume loss or discontinuities along the shear zone walls, problems of strain compatibility may be resolved if individual shear zones are linked together in an appropriate fashion. Shear zones commonly occur in anastomosing arrays, and simple configurations of such arrays and the strains associated with them are examined. It is shown that local transpression with strain compatibility can be accounted for in this way. Quite complex local strain patterns can develop in simple arrays.

Original languageEnglish (US)
Pages (from-to)923-932
Number of pages10
JournalJournal of Structural Geology
Volume21
Issue number8-9
DOIs
StatePublished - 1999

Bibliographical note

Funding Information:
I thank reviewers Haakon Fossen and Pierre Robin, whose comments and suggestions led to significant improvements in the manuscript. The research has been supported in part by NSF grant EAR-9506504.

Fingerprint

Dive into the research topics of 'Strain compatibility and shear zones: Is there a problem?'. Together they form a unique fingerprint.

Cite this