Projects per year
Abstract
The widespread utilization of metamaterials, despite their immense transformative potential, faces challenges regarding scalability in mass production. To address these limitations, an additive method that leverages liquid inks and selective wetting to produce scalable and cost-effective metamaterials is presented. UV-based imprinting lithography is utilized to fabricate surface energy-modulated patterns, enabling precise solution patterning. This approach, unlike conventional UV-based imprinting lithography, not only accurately produces the negative replica of the stamp topography during UV-induced crosslinking but also transfers a hydrophobic layer onto the raised surfaces of the imprinted hydrophilic layer, resulting in 3D shapes with spatially modulated surface energy. In the second process step, a functional ink is dragged over the patterned substrate where it dewets to fill the hydrophilic recesses. This innovative process enables high-speed metamaterial production, with ink deposition speeds up to 12 m min−1. The method accommodates a wide range of inks, including metals, dielectrics, and semiconductors, providing meticulous control over vertical structures such as pattern thickness and hetero-multilayer formation. Additionally, it offers flexibility in creating metamaterials on free-standing ultra-thin sheets, introducing desirable attributes like foldability and disposability. The effectiveness of this approach is validated through the fabrication and characterization of metallic metamaterials.
Original language | English (US) |
---|---|
Article number | 2302785 |
Journal | Advanced Optical Materials |
Volume | 12 |
Issue number | 15 |
DOIs | |
State | Published - May 28 2024 |
Bibliographical note
Publisher Copyright:© 2024 The Authors. Advanced Optical Materials published by Wiley-VCH GmbH.
Keywords
- additive micropatterning
- imprint lithography
- nanopatterning
- printed metamaterials
- selective wetting
- transfer printing
MRSEC Support
- Shared
Fingerprint
Dive into the research topics of 'Roll‐to‐Roll Compatible Topochemical Wetting Control for Metamaterial Printing'. Together they form a unique fingerprint.Projects
- 2 Active
-
IRG-1: Ionic Control of Materials
Leighton, C. (Leader), Birol, T. (Senior Investigator), Fernandes, R. M. (Senior Investigator), Frisbie, D. (Senior Investigator), Greven, M. (Senior Investigator), Jalan, B. (Senior Investigator), Mkhoyan, A. (Senior Investigator), Walter, J. (Senior Investigator) & Wang, X. (Senior Investigator)
9/1/20 → …
Project: Research project
-
University of Minnesota Materials Research Science and Engineering Center (DMR-2011401)
Leighton, C. (PI) & Lodge, T. (CoI)
THE NATIONAL SCIENCE FOUNDATION
9/1/20 → 8/31/26
Project: Research project