Photonic curing of solution-processed oxide semiconductors with efficient gate absorbers and minimal substrate heating for high-performance thin-film transistors

Adam M Weidling, Vikram S. Turkani, Bing Luo, Kurt A. Schroder, Sarah L. Swisher

Research output: Contribution to journalArticlepeer-review

12 Scopus citations


In this study, photonic curing is used to rapidly and effectively convert metal-oxide sol-gels to realize high-quality thin-film transistors (TFTs). Photonic curing offers advantages over conventional thermal processing methods such as ultrashort processing time and compatibility with low-temperature substrates. However, previous work on photonically cured TFTs often results in significant heating of the entire substrate rather than just the thin film at the surface. Here, sol-gel indium zinc oxide (IZO)-based TFTs are photonically cured with efficient gate absorbers requiring as few as five pulses using intense white light delivering radiant energy up to 6 J cm-2. Simulations indicate that the IZO film reaches a peak temperature of -590 °C while the back of the substrate stays below 30 °C. The requirements and design guidelines for photonic curing metal-oxide semiconductors for high-performance TFT applications are discussed, focusing on the importance of effective gate absorbers and optimized pulse designs to efficiently and effectively cure sol-gel films. This process yields TFTs with a field-effect mobility of 21.8 cm2 V-1 s-1 and an Ion/Ioff ratio approaching 108, which exceeds the performance of samples annealed at 500 °C for 1 h. This is the best performance and highest metal-oxide conversion for photonically cured oxide TFTs achieved to date that does not significantly heat the entire thickness of the substrate. Importantly, the conversion from sol-gel precursors to the semiconducting metal-oxide phase during photonic curing is on par with thermal annealing, which is a significant improvement over previous pulsed-light processing work. The use of efficient gate absorbers also allows for the reduction in the number of pulses and efficient sol-gel conversion.

Original languageEnglish (US)
Pages (from-to)17323-17334
Number of pages12
JournalACS Omega
Issue number27
StatePublished - Jul 13 2021

Bibliographical note

Funding Information:
This material is based upon the work supported by the National Science Foundation under Grant no. ECCS-1710008. Portions of this work were conducted in the Minnesota Nano Center, which is supported by the National Science Foundation through the National Nano Coordinated Infrastructure Network (NNCI) under award number ECCS-1542202. Parts of this work were carried out in the Characterizations Facility, University of Minnesota, which receives partial support from NSF through the MRSEC award number DMR-2011401. The authors would like to acknowledge B. Cote and the Ferry Lab at the University of Minnesota for the use of their UV–vis spectrometer.

Publisher Copyright:
© 2021 The Authors.

MRSEC Support

  • Shared

PubMed: MeSH publication types

  • Journal Article


Dive into the research topics of 'Photonic curing of solution-processed oxide semiconductors with efficient gate absorbers and minimal substrate heating for high-performance thin-film transistors'. Together they form a unique fingerprint.

Cite this