Nonlinear control of an electrohydraulic Injection Molding Machine via iterative learning

Heather Havlicsek, Andrew Alleyne

Research output: Contribution to journalConference articlepeer-review

8 Scopus citations

Abstract

This investigation examines the control of an industrial Injection Molding Machine (IMM) for both mold filling and mold packing. The machine is a Boy 50 Ton system operated by hydraulics with electronically controlled valves. A previously determined nonlinear model of the system is used to develop the control strategy. A feedforward control input is determined via an iterative Learning Control scheme. This input is combined with either a feedback Strategy or an open loop strategy for the filling and packing control phases, respectively. The time-delay, which exists in both stages, is accounted for by time shifting the Learning feedforward signal relative to the feedback control signal. Simulation and experimental investigations indicate the benefits of the proposed strategy for control of electrohydraulic IMMs. Subsequent to demonstrating the benefits for fill stage and pack stage Learning Control, a complete cycle including fill-to-pack transfer is demonstrated.

Original languageEnglish (US)
Pages (from-to)176-181
Number of pages6
JournalProceedings of the American Control Conference
Volume1
StatePublished - 1999
Externally publishedYes
EventProceedings of the 1999 American Control Conference (99ACC) - San Diego, CA, USA
Duration: Jun 2 1999Jun 4 1999

Fingerprint

Dive into the research topics of 'Nonlinear control of an electrohydraulic Injection Molding Machine via iterative learning'. Together they form a unique fingerprint.

Cite this