Longitudinal joint details with tight bend diameter U-bars

Zhongguo John Ma, Qi Cao, Cheryl E. Chapman, Edwin G. Burdette, Catherine E.W. French

Research output: Contribution to journalArticlepeer-review

11 Scopus citations

Abstract

This paper focuses on the investigation of longitudinal joint details with tight bend diameter U-bars for accelerated bridge construction. It presents the test results of potential alternate reinforcing materials and joint details in two phases. Headed bar and U-bar specimens made of stainless steel (SS) and deformed wire reinforcement (DWR) with the same joint detail confgurations were tested and compared in Phase I, followed by the testing of U-bars (DWR) with varied concrete strengths, bar spacings, and overlap lengths in Phase II. Test results were evaluated based on moment capacity, cracking at service and failure load, and steel strains. It was found that a 16 mm (No. 5) U-bar detail with a minimum bend diameter of three times the diameter of the bar (3db) can be used to facilitate accelerated bridge construction.

Original languageEnglish (US)
Pages (from-to)815-824
Number of pages10
JournalACI Structural Journal
Volume109
Issue number6
StatePublished - Nov 10 2012

Keywords

  • Accelerated construction
  • Bend diameter
  • Deformed wire reinforcement
  • Longitudinal joint
  • Overlap length

Fingerprint Dive into the research topics of 'Longitudinal joint details with tight bend diameter U-bars'. Together they form a unique fingerprint.

Cite this