Intermittent flow modeling. Part 1

Hydrodynamic and thermal modeling of steady, intermittent flows in constant area ducts

J. P. Abraham, E. M. Sparrow, J. C K Tong, W. J. Minkowycz

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Abstract

A model for predicting fluid flow and convective heat transfer in all flow regimes has been implemented for steady mainflows in pipes and ducts of constant cross section. The key feature of the model is its capability to predict transitions between purely laminar and purely turbulent flow, while the latter flows are also predicted with high accuracy. The flow regime need not be specified in advance but is determined automatically as the flow evolves during its passage along the pipe or duct. Intermittently in the transition regime is fully accounted. It was shown that fully developed flows are necessarily restricted to either the laminar regime or the turbulent regime, but that a fully developed intermittent regime exists. The effects of the flow conditions at the inlet of the pipe or duct, velocity profile shape and turbulence intensity, on the subsequent transitions were quantified. To facilitate the heat transfer analysis, the turbulent-Prandtl-number concept, widely used to inter-relate the turbulent viscosity and thermal conductivity, was extended to encompass both intermittent and laminar flows. The presented results include all-flow-regime fully developed friction factors and fully developed Nusselt numbers. The locations where laminar-flow breakdown occurs and where fully developed begins are also presented.

Original languageEnglish (US)
Title of host publication2010 14th International Heat Transfer Conference, IHTC 14
Pages659-667
Number of pages9
Volume2
DOIs
StatePublished - Dec 1 2010
Event2010 14th International Heat Transfer Conference, IHTC 14 - Washington, DC, United States
Duration: Aug 8 2010Aug 13 2010

Other

Other2010 14th International Heat Transfer Conference, IHTC 14
CountryUnited States
CityWashington, DC
Period8/8/108/13/10

Fingerprint

Steady flow
Ducts
Hydrodynamics
Pipe
Laminar flow
Heat transfer
Prandtl number
Nusselt number
Turbulent flow
Flow of fluids
Thermal conductivity
Turbulence
Viscosity
Friction
Hot Temperature

Cite this

Abraham, J. P., Sparrow, E. M., Tong, J. C. K., & Minkowycz, W. J. (2010). Intermittent flow modeling. Part 1: Hydrodynamic and thermal modeling of steady, intermittent flows in constant area ducts. In 2010 14th International Heat Transfer Conference, IHTC 14 (Vol. 2, pp. 659-667) https://doi.org/10.1115/IHTC14-22858

Intermittent flow modeling. Part 1 : Hydrodynamic and thermal modeling of steady, intermittent flows in constant area ducts. / Abraham, J. P.; Sparrow, E. M.; Tong, J. C K; Minkowycz, W. J.

2010 14th International Heat Transfer Conference, IHTC 14. Vol. 2 2010. p. 659-667.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abraham, JP, Sparrow, EM, Tong, JCK & Minkowycz, WJ 2010, Intermittent flow modeling. Part 1: Hydrodynamic and thermal modeling of steady, intermittent flows in constant area ducts. in 2010 14th International Heat Transfer Conference, IHTC 14. vol. 2, pp. 659-667, 2010 14th International Heat Transfer Conference, IHTC 14, Washington, DC, United States, 8/8/10. https://doi.org/10.1115/IHTC14-22858
Abraham JP, Sparrow EM, Tong JCK, Minkowycz WJ. Intermittent flow modeling. Part 1: Hydrodynamic and thermal modeling of steady, intermittent flows in constant area ducts. In 2010 14th International Heat Transfer Conference, IHTC 14. Vol. 2. 2010. p. 659-667 https://doi.org/10.1115/IHTC14-22858
Abraham, J. P. ; Sparrow, E. M. ; Tong, J. C K ; Minkowycz, W. J. / Intermittent flow modeling. Part 1 : Hydrodynamic and thermal modeling of steady, intermittent flows in constant area ducts. 2010 14th International Heat Transfer Conference, IHTC 14. Vol. 2 2010. pp. 659-667
@inproceedings{faff9279395244228bd3ad4e7c6f71f6,
title = "Intermittent flow modeling. Part 1: Hydrodynamic and thermal modeling of steady, intermittent flows in constant area ducts",
abstract = "A model for predicting fluid flow and convective heat transfer in all flow regimes has been implemented for steady mainflows in pipes and ducts of constant cross section. The key feature of the model is its capability to predict transitions between purely laminar and purely turbulent flow, while the latter flows are also predicted with high accuracy. The flow regime need not be specified in advance but is determined automatically as the flow evolves during its passage along the pipe or duct. Intermittently in the transition regime is fully accounted. It was shown that fully developed flows are necessarily restricted to either the laminar regime or the turbulent regime, but that a fully developed intermittent regime exists. The effects of the flow conditions at the inlet of the pipe or duct, velocity profile shape and turbulence intensity, on the subsequent transitions were quantified. To facilitate the heat transfer analysis, the turbulent-Prandtl-number concept, widely used to inter-relate the turbulent viscosity and thermal conductivity, was extended to encompass both intermittent and laminar flows. The presented results include all-flow-regime fully developed friction factors and fully developed Nusselt numbers. The locations where laminar-flow breakdown occurs and where fully developed begins are also presented.",
author = "Abraham, {J. P.} and Sparrow, {E. M.} and Tong, {J. C K} and Minkowycz, {W. J.}",
year = "2010",
month = "12",
day = "1",
doi = "10.1115/IHTC14-22858",
language = "English (US)",
isbn = "9780791849378",
volume = "2",
pages = "659--667",
booktitle = "2010 14th International Heat Transfer Conference, IHTC 14",

}

TY - GEN

T1 - Intermittent flow modeling. Part 1

T2 - Hydrodynamic and thermal modeling of steady, intermittent flows in constant area ducts

AU - Abraham, J. P.

AU - Sparrow, E. M.

AU - Tong, J. C K

AU - Minkowycz, W. J.

PY - 2010/12/1

Y1 - 2010/12/1

N2 - A model for predicting fluid flow and convective heat transfer in all flow regimes has been implemented for steady mainflows in pipes and ducts of constant cross section. The key feature of the model is its capability to predict transitions between purely laminar and purely turbulent flow, while the latter flows are also predicted with high accuracy. The flow regime need not be specified in advance but is determined automatically as the flow evolves during its passage along the pipe or duct. Intermittently in the transition regime is fully accounted. It was shown that fully developed flows are necessarily restricted to either the laminar regime or the turbulent regime, but that a fully developed intermittent regime exists. The effects of the flow conditions at the inlet of the pipe or duct, velocity profile shape and turbulence intensity, on the subsequent transitions were quantified. To facilitate the heat transfer analysis, the turbulent-Prandtl-number concept, widely used to inter-relate the turbulent viscosity and thermal conductivity, was extended to encompass both intermittent and laminar flows. The presented results include all-flow-regime fully developed friction factors and fully developed Nusselt numbers. The locations where laminar-flow breakdown occurs and where fully developed begins are also presented.

AB - A model for predicting fluid flow and convective heat transfer in all flow regimes has been implemented for steady mainflows in pipes and ducts of constant cross section. The key feature of the model is its capability to predict transitions between purely laminar and purely turbulent flow, while the latter flows are also predicted with high accuracy. The flow regime need not be specified in advance but is determined automatically as the flow evolves during its passage along the pipe or duct. Intermittently in the transition regime is fully accounted. It was shown that fully developed flows are necessarily restricted to either the laminar regime or the turbulent regime, but that a fully developed intermittent regime exists. The effects of the flow conditions at the inlet of the pipe or duct, velocity profile shape and turbulence intensity, on the subsequent transitions were quantified. To facilitate the heat transfer analysis, the turbulent-Prandtl-number concept, widely used to inter-relate the turbulent viscosity and thermal conductivity, was extended to encompass both intermittent and laminar flows. The presented results include all-flow-regime fully developed friction factors and fully developed Nusselt numbers. The locations where laminar-flow breakdown occurs and where fully developed begins are also presented.

UR - http://www.scopus.com/inward/record.url?scp=84860540815&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84860540815&partnerID=8YFLogxK

U2 - 10.1115/IHTC14-22858

DO - 10.1115/IHTC14-22858

M3 - Conference contribution

SN - 9780791849378

VL - 2

SP - 659

EP - 667

BT - 2010 14th International Heat Transfer Conference, IHTC 14

ER -