Hydraulic Performance and Pollutant Concentration Profile in a Stormwater Runoff Filtration Systems

Stormwater filtration system has proven to be effective for the removal of dissolved and particulate pollutants from roadways and car parking areas. However, the long-term treatment performance of filtration systems strongly depends on the hydraulic conductivity and sorption capacity of the filter media. This paper sought to provide information regarding the hydraulic performance, characteristics and metal concentration profiles in sediments accumulated at the surface of filtration systems (SDPL) and core filter media (FMC). The lifespan of the filter media was used to estimate the lifespan of the filter media. The results showed that saturated hydraulic conductivity of the filtration systems have significantly reduced over the operational time, yet acceptable (Kf = 5.9 × 10^-5 to 1.4 × 10^-4 m/s). The accumulated sediments (SDPL) were predominantly composed of fine particles with 70 % < 63 μm but the heavy metals were rather uniformly distributed in the different size fractions. The concentrations of heavy metals, particularly Cu, Pb and Zn were significantly higher in the SDPL and decreased with depth of the filter bed. However, Cr and Ni increased with depth of filter media demonstrating their removal was mainly by adsorption. Concentrations of Ba, Mn, Ti and V were comparable to Zn levels indicating comparable concentrations in roadway runoff. Simultaneous adsorption of multiple heavy metals in a column experiment demonstrated that the filter media could remain operational for over 34 years. However, there is a significant concern about their lifespan, particularly due to significant reduction in the hydraulic performance and the possibility of clogging of the systems over time. Therefore, to minimize hydraulic failure, the accumulated sediment be scraped off every 7 years.