Feasibility study of cadmium zinc telluride growth using a submerged heater in a vertical bridgman system

Andrew Yeckel, Jeffrey J. Derby

Research output: Contribution to journalArticlepeer-review

14 Scopus citations


Computer simulations are performed to assess the feasibility of a submerged heater system for growth of cadmium zinc telluride (CZT). Adding a submerged heater to the vertical Bridgman configuration in the manner of the submerged heater method (SHM) and axial-heat-flux-close-to-the-phase-interface (AHP) systems allows superior control of the growth interface shape and significant reduction in thermal stress. Simulations demonstrate that maintaining a constant gap width between heater and growth interface is critical to achieving uniform axial segregation when using zone leveling. Radial segregation remains somewhat nonuniform, however, because of the poor mixing in the interface region.

Original languageEnglish (US)
Pages (from-to)488-497
Number of pages10
JournalJournal of Electronic Materials
Issue number6
StatePublished - Jun 2004

Bibliographical note

Funding Information:
The research described in this publication was made possible in part by Award No. RE1-2480-AV-02 of the U.S. Civilian Research & Development Foundation for the Independent States of the Former Soviet Union in collaboration with V. Golyshev, M. Gonik, and V. Tsvetovsky. Support has also been provided by the University of Minnesota Supercomputer Institute.

Copyright 2018 Elsevier B.V., All rights reserved.


  • Axial heat flux close to the phase interface (AHP) method
  • Bridgman method
  • Cadmium zinc telluride
  • Segregation
  • Submerged heater


Dive into the research topics of 'Feasibility study of cadmium zinc telluride growth using a submerged heater in a vertical bridgman system'. Together they form a unique fingerprint.

Cite this