Effect of χn and underlayer composition on self-assembly of thin films of block copolymers with energy asymmetric block

Richard A. Lawson, Andrew J Peters, Benjamin D. Nation, Peter J. Ludovice, Clifford L. Henderson

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

Many high Χ block copolymer (BCP) systems often have one block which shows a strong preference to wet the free interface at the top of the film. This property makes it difficult to form vertically aligned lamellae which are desired for many directed self-assembly (DSA) applications. To better understand this behavior, simulations of thin films of BCPs were carried out using a coarse-grained molecular dynamics (MD) model. The property that leads one block to preferentially wet the free interface over the other is a difference in cohesive energy density (CED) between the two blocks. Our simulation allows for the systematic variation in the CED of each block to investigate how the magnitude of these differences affects self-assembly behavior. BCPs with no CED differences between the blocks show large ranges of underlayer compositions where vertical lamellae will form that are minimally affected by changing Χ of the BCP. The range where vertical lamellae will form can be thought of as a process window. Increasing the CED asymmetry of the BCP (i.e. the difference in CED between blocks) causes a reduction in the process window and also causes a shift in the underlayer composition that is the center of the window. Increasing Χ increases the process window for vertical lamellae in CED asymmetric systems. This behavior is determined by the trade-off in energy due to three interfacial interactions: A-B interface, film-free surface interface, and film-underlayer interface. At the limits of very high CED asymmetry and low Χ, there may be no underlayer compositions where vertical lamellae will form. A simplified model was also developed that can accurately predict these process windows for different CED asymmetry and Χ values on the order of seconds and minutes compared to hours and days for the full simulation.

Original languageEnglish (US)
Title of host publicationAlternative Lithographic Technologies VII
EditorsChristopher Bencher, Douglas J. Resnick
PublisherSPIE
ISBN (Electronic)9781628415254
DOIs
StatePublished - Jan 1 2015
EventAlternative Lithographic Technologies VII - San Jose, United States
Duration: Feb 23 2015Feb 26 2015

Publication series

NameProceedings of SPIE - The International Society for Optical Engineering
Volume9423
ISSN (Print)0277-786X
ISSN (Electronic)1996-756X

Other

OtherAlternative Lithographic Technologies VII
CountryUnited States
CitySan Jose
Period2/23/152/26/15

Fingerprint

Block Copolymers
Self-assembly
block copolymers
Energy Density
Self assembly
Block copolymers
self assembly
Thin Films
flux density
lamella
Thin films
Process Window
thin films
Energy
Chemical analysis
Vertical
Asymmetry
energy
asymmetry
Molecular dynamics

Keywords

  • block copolymer
  • cohesive energy density
  • directed self-assembly
  • molecular dynamics
  • simplified BCP models
  • thin film morphologies

Cite this

Lawson, R. A., Peters, A. J., Nation, B. D., Ludovice, P. J., & Henderson, C. L. (2015). Effect of χn and underlayer composition on self-assembly of thin films of block copolymers with energy asymmetric block. In C. Bencher, & D. J. Resnick (Eds.), Alternative Lithographic Technologies VII [94231L] (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 9423). SPIE. https://doi.org/10.1117/12.2086047

Effect of χn and underlayer composition on self-assembly of thin films of block copolymers with energy asymmetric block. / Lawson, Richard A.; Peters, Andrew J; Nation, Benjamin D.; Ludovice, Peter J.; Henderson, Clifford L.

Alternative Lithographic Technologies VII. ed. / Christopher Bencher; Douglas J. Resnick. SPIE, 2015. 94231L (Proceedings of SPIE - The International Society for Optical Engineering; Vol. 9423).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Lawson, RA, Peters, AJ, Nation, BD, Ludovice, PJ & Henderson, CL 2015, Effect of χn and underlayer composition on self-assembly of thin films of block copolymers with energy asymmetric block. in C Bencher & DJ Resnick (eds), Alternative Lithographic Technologies VII., 94231L, Proceedings of SPIE - The International Society for Optical Engineering, vol. 9423, SPIE, Alternative Lithographic Technologies VII, San Jose, United States, 2/23/15. https://doi.org/10.1117/12.2086047
Lawson RA, Peters AJ, Nation BD, Ludovice PJ, Henderson CL. Effect of χn and underlayer composition on self-assembly of thin films of block copolymers with energy asymmetric block. In Bencher C, Resnick DJ, editors, Alternative Lithographic Technologies VII. SPIE. 2015. 94231L. (Proceedings of SPIE - The International Society for Optical Engineering). https://doi.org/10.1117/12.2086047
Lawson, Richard A. ; Peters, Andrew J ; Nation, Benjamin D. ; Ludovice, Peter J. ; Henderson, Clifford L. / Effect of χn and underlayer composition on self-assembly of thin films of block copolymers with energy asymmetric block. Alternative Lithographic Technologies VII. editor / Christopher Bencher ; Douglas J. Resnick. SPIE, 2015. (Proceedings of SPIE - The International Society for Optical Engineering).
@inproceedings{f045e4ff28864ac5a74a3ac9ccf518e3,
title = "Effect of χn and underlayer composition on self-assembly of thin films of block copolymers with energy asymmetric block",
abstract = "Many high Χ block copolymer (BCP) systems often have one block which shows a strong preference to wet the free interface at the top of the film. This property makes it difficult to form vertically aligned lamellae which are desired for many directed self-assembly (DSA) applications. To better understand this behavior, simulations of thin films of BCPs were carried out using a coarse-grained molecular dynamics (MD) model. The property that leads one block to preferentially wet the free interface over the other is a difference in cohesive energy density (CED) between the two blocks. Our simulation allows for the systematic variation in the CED of each block to investigate how the magnitude of these differences affects self-assembly behavior. BCPs with no CED differences between the blocks show large ranges of underlayer compositions where vertical lamellae will form that are minimally affected by changing Χ of the BCP. The range where vertical lamellae will form can be thought of as a process window. Increasing the CED asymmetry of the BCP (i.e. the difference in CED between blocks) causes a reduction in the process window and also causes a shift in the underlayer composition that is the center of the window. Increasing Χ increases the process window for vertical lamellae in CED asymmetric systems. This behavior is determined by the trade-off in energy due to three interfacial interactions: A-B interface, film-free surface interface, and film-underlayer interface. At the limits of very high CED asymmetry and low Χ, there may be no underlayer compositions where vertical lamellae will form. A simplified model was also developed that can accurately predict these process windows for different CED asymmetry and Χ values on the order of seconds and minutes compared to hours and days for the full simulation.",
keywords = "block copolymer, cohesive energy density, directed self-assembly, molecular dynamics, simplified BCP models, thin film morphologies",
author = "Lawson, {Richard A.} and Peters, {Andrew J} and Nation, {Benjamin D.} and Ludovice, {Peter J.} and Henderson, {Clifford L.}",
year = "2015",
month = "1",
day = "1",
doi = "10.1117/12.2086047",
language = "English (US)",
series = "Proceedings of SPIE - The International Society for Optical Engineering",
publisher = "SPIE",
editor = "Christopher Bencher and Resnick, {Douglas J.}",
booktitle = "Alternative Lithographic Technologies VII",
address = "United States",

}

TY - GEN

T1 - Effect of χn and underlayer composition on self-assembly of thin films of block copolymers with energy asymmetric block

AU - Lawson, Richard A.

AU - Peters, Andrew J

AU - Nation, Benjamin D.

AU - Ludovice, Peter J.

AU - Henderson, Clifford L.

PY - 2015/1/1

Y1 - 2015/1/1

N2 - Many high Χ block copolymer (BCP) systems often have one block which shows a strong preference to wet the free interface at the top of the film. This property makes it difficult to form vertically aligned lamellae which are desired for many directed self-assembly (DSA) applications. To better understand this behavior, simulations of thin films of BCPs were carried out using a coarse-grained molecular dynamics (MD) model. The property that leads one block to preferentially wet the free interface over the other is a difference in cohesive energy density (CED) between the two blocks. Our simulation allows for the systematic variation in the CED of each block to investigate how the magnitude of these differences affects self-assembly behavior. BCPs with no CED differences between the blocks show large ranges of underlayer compositions where vertical lamellae will form that are minimally affected by changing Χ of the BCP. The range where vertical lamellae will form can be thought of as a process window. Increasing the CED asymmetry of the BCP (i.e. the difference in CED between blocks) causes a reduction in the process window and also causes a shift in the underlayer composition that is the center of the window. Increasing Χ increases the process window for vertical lamellae in CED asymmetric systems. This behavior is determined by the trade-off in energy due to three interfacial interactions: A-B interface, film-free surface interface, and film-underlayer interface. At the limits of very high CED asymmetry and low Χ, there may be no underlayer compositions where vertical lamellae will form. A simplified model was also developed that can accurately predict these process windows for different CED asymmetry and Χ values on the order of seconds and minutes compared to hours and days for the full simulation.

AB - Many high Χ block copolymer (BCP) systems often have one block which shows a strong preference to wet the free interface at the top of the film. This property makes it difficult to form vertically aligned lamellae which are desired for many directed self-assembly (DSA) applications. To better understand this behavior, simulations of thin films of BCPs were carried out using a coarse-grained molecular dynamics (MD) model. The property that leads one block to preferentially wet the free interface over the other is a difference in cohesive energy density (CED) between the two blocks. Our simulation allows for the systematic variation in the CED of each block to investigate how the magnitude of these differences affects self-assembly behavior. BCPs with no CED differences between the blocks show large ranges of underlayer compositions where vertical lamellae will form that are minimally affected by changing Χ of the BCP. The range where vertical lamellae will form can be thought of as a process window. Increasing the CED asymmetry of the BCP (i.e. the difference in CED between blocks) causes a reduction in the process window and also causes a shift in the underlayer composition that is the center of the window. Increasing Χ increases the process window for vertical lamellae in CED asymmetric systems. This behavior is determined by the trade-off in energy due to three interfacial interactions: A-B interface, film-free surface interface, and film-underlayer interface. At the limits of very high CED asymmetry and low Χ, there may be no underlayer compositions where vertical lamellae will form. A simplified model was also developed that can accurately predict these process windows for different CED asymmetry and Χ values on the order of seconds and minutes compared to hours and days for the full simulation.

KW - block copolymer

KW - cohesive energy density

KW - directed self-assembly

KW - molecular dynamics

KW - simplified BCP models

KW - thin film morphologies

UR - http://www.scopus.com/inward/record.url?scp=84931308048&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84931308048&partnerID=8YFLogxK

U2 - 10.1117/12.2086047

DO - 10.1117/12.2086047

M3 - Conference contribution

T3 - Proceedings of SPIE - The International Society for Optical Engineering

BT - Alternative Lithographic Technologies VII

A2 - Bencher, Christopher

A2 - Resnick, Douglas J.

PB - SPIE

ER -