Dispersible exfoliated zeolite nanosheets and their application as membrane

Kumar Varoon, Xueyi Zhang, Lorraine F. Francis, Michael Tsapatsis

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

High aspect ratio zeolite particles with thickness in the 2-3 nanometer range (zeolite nanosheets) can be derived from exfoliation of their lamellar precursors (layered zeolites) and can be used as catalysts and building blocks for fabrication of thin films. Thin zeolite films made using exfoliated zeolite nanosheets could show improved performance and processing advantages as membranes for separations, low dielectric coatings, corrosion protection, chemical sensors, membrane reactors, etc. Here we report exfoliation of a multilamellar zeolite (silicalite-1) and subsequent processing to obtain a dispersible coating suspension of exfoliated silicalite-1 sheets followed by demonstration of its utility as a gas separation membrane. Exfoliation and structure preservation of multilamellar silicalite-1 was confirmed by Transmission electron microscopy (TEM). Scanning probe microscopy (SPM) was used to characterize the thickness of the exfoliated silicalite-1 nanosheets. A thin b-oriented film of exfoliated nanosheets was coated on top of a porous α-alumina support. The coating morphology and cross section was characterized by scanning electron microscopy (SEM) and TEM respectively. The defects in the coating were removed by hydrothermal treatment of the silicalite-1in presence of a growth solution. The silicalite-1 membrane was characterized by xylene isomer vapor permeance in Wicke-Kallenbach mode at 150°C, where a separation factor of 67 was obtained between p-xylene and o-xylene. Thepermeance of p-xylene through the membrane (3.1E-07 mol/m 2/s/Pa) wasclose to that of the alumina support (4.2E-07 mol/m 2/s/Pa).

Original languageEnglish (US)
Title of host publication11AIChE - 2011 AIChE Annual Meeting, Conference Proceedings
StatePublished - Dec 1 2011
Event2011 AIChE Annual Meeting, 11AIChE - Minneapolis, MN, United States
Duration: Oct 16 2011Oct 21 2011

Other

Other2011 AIChE Annual Meeting, 11AIChE
CountryUnited States
CityMinneapolis, MN
Period10/16/1110/21/11

Fingerprint

Zeolites
Nanosheets
Xylene
Membranes
Coatings
Aluminum Oxide
Alumina
Transmission electron microscopy
Thin films
Scanning probe microscopy
Corrosion protection
Xylenes
Processing
Chemical sensors
Isomers
Aspect ratio
Demonstrations
Vapors
Suspensions
Fabrication

Cite this

Varoon, K., Zhang, X., Francis, L. F., & Tsapatsis, M. (2011). Dispersible exfoliated zeolite nanosheets and their application as membrane. In 11AIChE - 2011 AIChE Annual Meeting, Conference Proceedings

Dispersible exfoliated zeolite nanosheets and their application as membrane. / Varoon, Kumar; Zhang, Xueyi; Francis, Lorraine F.; Tsapatsis, Michael.

11AIChE - 2011 AIChE Annual Meeting, Conference Proceedings. 2011.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Varoon, K, Zhang, X, Francis, LF & Tsapatsis, M 2011, Dispersible exfoliated zeolite nanosheets and their application as membrane. in 11AIChE - 2011 AIChE Annual Meeting, Conference Proceedings. 2011 AIChE Annual Meeting, 11AIChE, Minneapolis, MN, United States, 10/16/11.
Varoon K, Zhang X, Francis LF, Tsapatsis M. Dispersible exfoliated zeolite nanosheets and their application as membrane. In 11AIChE - 2011 AIChE Annual Meeting, Conference Proceedings. 2011
Varoon, Kumar ; Zhang, Xueyi ; Francis, Lorraine F. ; Tsapatsis, Michael. / Dispersible exfoliated zeolite nanosheets and their application as membrane. 11AIChE - 2011 AIChE Annual Meeting, Conference Proceedings. 2011.
@inproceedings{c1ad71a99a9f47fb98d9052d6952eec4,
title = "Dispersible exfoliated zeolite nanosheets and their application as membrane",
abstract = "High aspect ratio zeolite particles with thickness in the 2-3 nanometer range (zeolite nanosheets) can be derived from exfoliation of their lamellar precursors (layered zeolites) and can be used as catalysts and building blocks for fabrication of thin films. Thin zeolite films made using exfoliated zeolite nanosheets could show improved performance and processing advantages as membranes for separations, low dielectric coatings, corrosion protection, chemical sensors, membrane reactors, etc. Here we report exfoliation of a multilamellar zeolite (silicalite-1) and subsequent processing to obtain a dispersible coating suspension of exfoliated silicalite-1 sheets followed by demonstration of its utility as a gas separation membrane. Exfoliation and structure preservation of multilamellar silicalite-1 was confirmed by Transmission electron microscopy (TEM). Scanning probe microscopy (SPM) was used to characterize the thickness of the exfoliated silicalite-1 nanosheets. A thin b-oriented film of exfoliated nanosheets was coated on top of a porous α-alumina support. The coating morphology and cross section was characterized by scanning electron microscopy (SEM) and TEM respectively. The defects in the coating were removed by hydrothermal treatment of the silicalite-1in presence of a growth solution. The silicalite-1 membrane was characterized by xylene isomer vapor permeance in Wicke-Kallenbach mode at 150°C, where a separation factor of 67 was obtained between p-xylene and o-xylene. Thepermeance of p-xylene through the membrane (3.1E-07 mol/m 2/s/Pa) wasclose to that of the alumina support (4.2E-07 mol/m 2/s/Pa).",
author = "Kumar Varoon and Xueyi Zhang and Francis, {Lorraine F.} and Michael Tsapatsis",
year = "2011",
month = "12",
day = "1",
language = "English (US)",
isbn = "9780816910700",
booktitle = "11AIChE - 2011 AIChE Annual Meeting, Conference Proceedings",

}

TY - GEN

T1 - Dispersible exfoliated zeolite nanosheets and their application as membrane

AU - Varoon, Kumar

AU - Zhang, Xueyi

AU - Francis, Lorraine F.

AU - Tsapatsis, Michael

PY - 2011/12/1

Y1 - 2011/12/1

N2 - High aspect ratio zeolite particles with thickness in the 2-3 nanometer range (zeolite nanosheets) can be derived from exfoliation of their lamellar precursors (layered zeolites) and can be used as catalysts and building blocks for fabrication of thin films. Thin zeolite films made using exfoliated zeolite nanosheets could show improved performance and processing advantages as membranes for separations, low dielectric coatings, corrosion protection, chemical sensors, membrane reactors, etc. Here we report exfoliation of a multilamellar zeolite (silicalite-1) and subsequent processing to obtain a dispersible coating suspension of exfoliated silicalite-1 sheets followed by demonstration of its utility as a gas separation membrane. Exfoliation and structure preservation of multilamellar silicalite-1 was confirmed by Transmission electron microscopy (TEM). Scanning probe microscopy (SPM) was used to characterize the thickness of the exfoliated silicalite-1 nanosheets. A thin b-oriented film of exfoliated nanosheets was coated on top of a porous α-alumina support. The coating morphology and cross section was characterized by scanning electron microscopy (SEM) and TEM respectively. The defects in the coating were removed by hydrothermal treatment of the silicalite-1in presence of a growth solution. The silicalite-1 membrane was characterized by xylene isomer vapor permeance in Wicke-Kallenbach mode at 150°C, where a separation factor of 67 was obtained between p-xylene and o-xylene. Thepermeance of p-xylene through the membrane (3.1E-07 mol/m 2/s/Pa) wasclose to that of the alumina support (4.2E-07 mol/m 2/s/Pa).

AB - High aspect ratio zeolite particles with thickness in the 2-3 nanometer range (zeolite nanosheets) can be derived from exfoliation of their lamellar precursors (layered zeolites) and can be used as catalysts and building blocks for fabrication of thin films. Thin zeolite films made using exfoliated zeolite nanosheets could show improved performance and processing advantages as membranes for separations, low dielectric coatings, corrosion protection, chemical sensors, membrane reactors, etc. Here we report exfoliation of a multilamellar zeolite (silicalite-1) and subsequent processing to obtain a dispersible coating suspension of exfoliated silicalite-1 sheets followed by demonstration of its utility as a gas separation membrane. Exfoliation and structure preservation of multilamellar silicalite-1 was confirmed by Transmission electron microscopy (TEM). Scanning probe microscopy (SPM) was used to characterize the thickness of the exfoliated silicalite-1 nanosheets. A thin b-oriented film of exfoliated nanosheets was coated on top of a porous α-alumina support. The coating morphology and cross section was characterized by scanning electron microscopy (SEM) and TEM respectively. The defects in the coating were removed by hydrothermal treatment of the silicalite-1in presence of a growth solution. The silicalite-1 membrane was characterized by xylene isomer vapor permeance in Wicke-Kallenbach mode at 150°C, where a separation factor of 67 was obtained between p-xylene and o-xylene. Thepermeance of p-xylene through the membrane (3.1E-07 mol/m 2/s/Pa) wasclose to that of the alumina support (4.2E-07 mol/m 2/s/Pa).

UR - http://www.scopus.com/inward/record.url?scp=84863133313&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84863133313&partnerID=8YFLogxK

M3 - Conference contribution

SN - 9780816910700

BT - 11AIChE - 2011 AIChE Annual Meeting, Conference Proceedings

ER -