Cross-Linked Nonwoven Fibers by Room-Temperature Cure Blowing and in Situ Photopolymerization

Aditya Banerji, Kailong Jin, Kunwei Liu, Mahesh Mahanthappa, Christopher J Ellison

Research output: Contribution to journalArticle

Abstract

Current synthetic nonwoven fiber production methods typically require transforming preformed polymers into a processable melt or solution state by heating or adding organic solvents, respectively, to facilitate fiber spinning. The significant energy demands and the use of volatile organic compounds render these processes suboptimal. Furthermore, conventional synthetic fiber manufacturing processes are limited to thermoplastics because cross-linked thermosets do not flow; however, the superior thermal and chemical resistance of cross-linked fibers render them attractive targets. In this study, we describe a "cure blowing" process that addresses these limitations by producing cross-linked fibers at room temperature with little or no solvent, using a lab-scale spinning die resembling those used for commercial melt blowing, an approach that currently produces >10% of global nonwovens. Specifically, a photocurable liquid mixture of thiol and acrylate monomers was extruded through an orifice and drawn by high-velocity air jets at ambient temperature into liquid fibers which were cross-linked into solid fibers by in situ photopolymerization during flight toward the collector. The effect of process parameters on the fiber diameter and morphology was investigated to understand the fundamental principles of cure blowing. Two intrinsic process limitations were identified in the drive to produce smaller yet uniform fibers, and strategies to circumvent them were identified. We anticipate that cure blowing may be an industrially relevant and environmentally friendly method for producing cross-linked polymeric nonwovens for a wide range of applications.

Original languageEnglish (US)
JournalMacromolecules
DOIs
StateAccepted/In press - Jan 1 2019

Fingerprint

Photopolymerization
Blow molding
Fibers
Temperature
Volatile Organic Compounds
Chemical resistance
Synthetic fibers
Thermosets
Liquids
Orifices
Volatile organic compounds
Sulfhydryl Compounds
Heat resistance
Organic solvents
Thermoplastics
Polymers
Monomers
Heating
Air

How much support was provided by MRSEC?

  • Shared

Reporting period for MRSEC

  • Period 6

Cite this

Cross-Linked Nonwoven Fibers by Room-Temperature Cure Blowing and in Situ Photopolymerization. / Banerji, Aditya; Jin, Kailong; Liu, Kunwei; Mahanthappa, Mahesh; Ellison, Christopher J.

In: Macromolecules, 01.01.2019.

Research output: Contribution to journalArticle

@article{0384b3305e004ec5ad6edeb9fa60d54c,
title = "Cross-Linked Nonwoven Fibers by Room-Temperature Cure Blowing and in Situ Photopolymerization",
abstract = "Current synthetic nonwoven fiber production methods typically require transforming preformed polymers into a processable melt or solution state by heating or adding organic solvents, respectively, to facilitate fiber spinning. The significant energy demands and the use of volatile organic compounds render these processes suboptimal. Furthermore, conventional synthetic fiber manufacturing processes are limited to thermoplastics because cross-linked thermosets do not flow; however, the superior thermal and chemical resistance of cross-linked fibers render them attractive targets. In this study, we describe a {"}cure blowing{"} process that addresses these limitations by producing cross-linked fibers at room temperature with little or no solvent, using a lab-scale spinning die resembling those used for commercial melt blowing, an approach that currently produces >10{\%} of global nonwovens. Specifically, a photocurable liquid mixture of thiol and acrylate monomers was extruded through an orifice and drawn by high-velocity air jets at ambient temperature into liquid fibers which were cross-linked into solid fibers by in situ photopolymerization during flight toward the collector. The effect of process parameters on the fiber diameter and morphology was investigated to understand the fundamental principles of cure blowing. Two intrinsic process limitations were identified in the drive to produce smaller yet uniform fibers, and strategies to circumvent them were identified. We anticipate that cure blowing may be an industrially relevant and environmentally friendly method for producing cross-linked polymeric nonwovens for a wide range of applications.",
author = "Aditya Banerji and Kailong Jin and Kunwei Liu and Mahesh Mahanthappa and Ellison, {Christopher J}",
year = "2019",
month = "1",
day = "1",
doi = "10.1021/acs.macromol.9b01002",
language = "English (US)",
journal = "Macromolecules",
issn = "0024-9297",
publisher = "American Chemical Society",

}

TY - JOUR

T1 - Cross-Linked Nonwoven Fibers by Room-Temperature Cure Blowing and in Situ Photopolymerization

AU - Banerji, Aditya

AU - Jin, Kailong

AU - Liu, Kunwei

AU - Mahanthappa, Mahesh

AU - Ellison, Christopher J

PY - 2019/1/1

Y1 - 2019/1/1

N2 - Current synthetic nonwoven fiber production methods typically require transforming preformed polymers into a processable melt or solution state by heating or adding organic solvents, respectively, to facilitate fiber spinning. The significant energy demands and the use of volatile organic compounds render these processes suboptimal. Furthermore, conventional synthetic fiber manufacturing processes are limited to thermoplastics because cross-linked thermosets do not flow; however, the superior thermal and chemical resistance of cross-linked fibers render them attractive targets. In this study, we describe a "cure blowing" process that addresses these limitations by producing cross-linked fibers at room temperature with little or no solvent, using a lab-scale spinning die resembling those used for commercial melt blowing, an approach that currently produces >10% of global nonwovens. Specifically, a photocurable liquid mixture of thiol and acrylate monomers was extruded through an orifice and drawn by high-velocity air jets at ambient temperature into liquid fibers which were cross-linked into solid fibers by in situ photopolymerization during flight toward the collector. The effect of process parameters on the fiber diameter and morphology was investigated to understand the fundamental principles of cure blowing. Two intrinsic process limitations were identified in the drive to produce smaller yet uniform fibers, and strategies to circumvent them were identified. We anticipate that cure blowing may be an industrially relevant and environmentally friendly method for producing cross-linked polymeric nonwovens for a wide range of applications.

AB - Current synthetic nonwoven fiber production methods typically require transforming preformed polymers into a processable melt or solution state by heating or adding organic solvents, respectively, to facilitate fiber spinning. The significant energy demands and the use of volatile organic compounds render these processes suboptimal. Furthermore, conventional synthetic fiber manufacturing processes are limited to thermoplastics because cross-linked thermosets do not flow; however, the superior thermal and chemical resistance of cross-linked fibers render them attractive targets. In this study, we describe a "cure blowing" process that addresses these limitations by producing cross-linked fibers at room temperature with little or no solvent, using a lab-scale spinning die resembling those used for commercial melt blowing, an approach that currently produces >10% of global nonwovens. Specifically, a photocurable liquid mixture of thiol and acrylate monomers was extruded through an orifice and drawn by high-velocity air jets at ambient temperature into liquid fibers which were cross-linked into solid fibers by in situ photopolymerization during flight toward the collector. The effect of process parameters on the fiber diameter and morphology was investigated to understand the fundamental principles of cure blowing. Two intrinsic process limitations were identified in the drive to produce smaller yet uniform fibers, and strategies to circumvent them were identified. We anticipate that cure blowing may be an industrially relevant and environmentally friendly method for producing cross-linked polymeric nonwovens for a wide range of applications.

UR - http://www.scopus.com/inward/record.url?scp=85072332673&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85072332673&partnerID=8YFLogxK

U2 - 10.1021/acs.macromol.9b01002

DO - 10.1021/acs.macromol.9b01002

M3 - Article

AN - SCOPUS:85072332673

JO - Macromolecules

JF - Macromolecules

SN - 0024-9297

ER -