Comparative Analysis of One-Dimensional and Two-Dimensional Cantilever Piezoelectric Energy Harvesters

Nathan Sharpes, Abdessattar Abdelkefi, Shashank Priya

Research output: Contribution to journalArticlepeer-review

25 Scopus citations

Abstract

A long-standing encumbrance in the design of low-frequency energy harvesters has been the need of substantial beam length and/or large tip mass values to reach the low resonance frequencies where significant energy can be harvested from the ambient vibration sources. This need of large length and tip mass may result in a device that is too large to be practical. The zigzag (meandering) beam structure has emerged as a solution to this problem. In this letter, we provide comparative analysis between the classical one-dimensional cantilever bimorph and the two-dimensional zigzag unimorph piezoelectric energy harvesters. The results demonstrate that depending upon the excitation frequency, the zigzag harvester is significantly better in terms of magnitude of natural frequency, harvested power, and power density, compared to the cantilever configuration. The dimensions were chosen for each design such that the zigzag structure would have 25.4×25.4 mm2 area, and the cantilever would have the same surface area. The zigzag prototype of 25.4×25.4 mm2 area was capable of generating 65 μW/cm3 at 32 Hz when subjected to 0.1 G base acceleration.

Original languageEnglish (US)
Pages (from-to)209-216
Number of pages8
JournalEnergy Harvesting and Systems
Volume1
Issue number3
DOIs
StatePublished - 2014
Externally publishedYes

Bibliographical note

Publisher Copyright:
© 2014 by De Gruyter 2014.

Keywords

  • 2D beam shape
  • high power density
  • low frequency
  • piezoelectric energy harvesting
  • vibration energy harvesting
  • zigzag beam shape

Fingerprint

Dive into the research topics of 'Comparative Analysis of One-Dimensional and Two-Dimensional Cantilever Piezoelectric Energy Harvesters'. Together they form a unique fingerprint.

Cite this