Beam theory models for thin film segments cohesively bonded to an elastic half space

T. W. Shield, K. S. Kim

Research output: Contribution to journalArticlepeer-review

85 Scopus citations

Abstract

A thin film segment bonded to an elastic half space is modelled. Previous works have considered membrane models which only take into account the in-plane stiffness of the film and ignore its bending stiffness. To include bending stiffness, a beam theory is used to model the film. The beam model calculations are compared to results from membrane theory. Membrane theory is found to agree with beam theory for the stiffest films, but the energy release rates (or J-integrals) are very close for all films. However, membrane theory can never give information on the normal stresses at the interface and consequently on the mode mixity of the loading at the film edge (or crack lip). To include yielding of the interface at the ends of the film, a cohesive zone model is employed. This zone is a shear zone. that is, only tangential slip in the zone is allowed with no normal opening. The cohesive zone results could be used for determining the interface strengths if the size of the cohesive zone was measured. It was also found that the sign of the normal stress at the tip of the cohesive zone depends on the length of the zone. The structure is loaded by an applied uniform compressive strain in the substrate which can also represent a thermal mismatch strain. The method of solution is to reduce the differential equations for a beam to integral equations which are then coupled to the singular integral equations for a half space. The standard technique of expansion in orthogonal polynomials is used. All the integrations required are performed analytically. The only numerical procedures are in the solution of a set of linear equations and a root finding procedure to determine the cohesive zone size at a given value of the yield stress.

Original languageEnglish (US)
Pages (from-to)1085-1103
Number of pages19
JournalInternational Journal of Solids and Structures
Volume29
Issue number9
DOIs
StatePublished - 1992

Bibliographical note

Funding Information:
Acknowledgements-This work was supported by IBM, agreement number 148/FE2061OIZ, through the University of Illinois. We would also like to thank L. B. Freund and R. T. Shield for many helpful conversations.

Fingerprint

Dive into the research topics of 'Beam theory models for thin film segments cohesively bonded to an elastic half space'. Together they form a unique fingerprint.

Cite this