Ammonium removal in advective-flow membrane-aerated biofilm reactors (AF-MABRs)

Ali R. Ahmadi Motlagh, Timothy M. LaPara, Michael J. Semmens

Research output: Contribution to journalArticlepeer-review

22 Scopus citations

Abstract

A novel membrane-aerated biofilm reactor configuration was tested in which substrate was delivered to the biofilm via advective as well as diffusive transport. Ammonium-rich synthetic wastewater was pumped across a fabric of hollow-fiber membranes and biofilm grew around and between the membrane fibers to form a continuous structure. High ammonium removal rates (10-24 g N m-2 d-1) were achieved in our reactors compared to the conventional biofilm processes, which rely mostly on diffusive transport for substrate delivery. The removal rates were in good agreement with our mathematical model predictions. Low pressure drops (<0.05 atm) were maintained across the biofilm throughout the course of study. The major problem with this novel configuration appeared to be the short-circuiting due to non-uniform structure of the biofilm formed on membrane fabric. Further research is needed to address the problem of short-circuiting by studying the effect of operational parameters and membrane design on the behavior of system.

Original languageEnglish (US)
Pages (from-to)76-81
Number of pages6
JournalJournal of Membrane Science
Volume319
Issue number1-2
DOIs
StatePublished - Jul 1 2008

Keywords

  • Advective flow
  • Ammonium removal
  • Bioreactor
  • Hollow-fiber membrane fabric
  • Model

Fingerprint

Dive into the research topics of 'Ammonium removal in advective-flow membrane-aerated biofilm reactors (AF-MABRs)'. Together they form a unique fingerprint.

Cite this