A review of the systems approach to the analysis of dynamic-mode atomic force microscopy

Abu Sebastian; Anil Gannepalli; Murti V. Salapaka

doi:10.1109/TCST.2007.902959

A review of the systems approach to the analysis of dynamic-mode atomic force microscopy

Abu Sebastian, Anil Gannepalli, Murti V. Salapaka

Electrical and Computer Engineering

Research output: Contribution to journal › Review article › peer-review

42 Scopus citations

Abstract

The atomic force microscope (AFM) is one of the foremost tools for imaging, measuring and manipulating matter at the nanoscale. This brief presents a review of the systems and control approach to analyzing the challenging dynamic-mode operation of the AFM. A Luré system perspective of the AFM dynamics facilitates the application of powerful tools from systems theory for the analysis. The harmonic balance method provides significant insights into the steady-state behavior as well as a framework for identifying the tip-sample interaction force. A simple piecewise-linear tip-sample interaction model and its identification using the harmonic balance method is presented. The dominant first harmonic is analyzed using multivalued frequency responses and the corresponding stability conditions. The ability of the simple tip-sample interaction model to capture the intricate nonlinear behavior of the first harmonic is demonstrated. This also points to the importance of studying the higher harmonics to obtain finer details of the tip-sample interaction. The suitability of the Luré system perspective for the analysis of the higher harmonics is demonstrated.

Original language	English (US)
Pages (from-to)	952-959
Number of pages	8
Journal	IEEE Transactions on Control Systems Technology
Volume	15
Issue number	5 SPEC. ISS.
DOIs	https://doi.org/10.1109/TCST.2007.902959
State	Published - 2007

Bibliographical note

Funding Information:
Manuscript received February 19, 2007. Manuscript received in final form April 20, 2007. Recommended by Guest Editor S. Devasia. The work of M. Salapaka was supported by the National Science Foundation under Grant CMS 0626171 and Grant ECS 0601571. A. Sebastian is with IBM Research GmbH, Zurich Research Laboratory, 8803 Rüschlikon, Switzerland (e-mail: [email protected]). A. Gannepalli is with Asylum Research Inc., Santa Barbara, CA 93117 USA (e-mail: [email protected]). M. V. Salapaka is with the Department of Electrical and Computer Engineering, Iowa State University, Ames, IA 50011 USA (e-mail: murti@iastate. edu). Color versions of one or more of the figures in this paper are available online at http://ieeexplore.ieee.org. Digital Object Identifier 10.1109/TCST.2007.902959

Keywords

Asymptotic methods
Atomic force microscopy (AFM)
Dynamic-mode AFM
Harmonic balance
Integral quadratic constraints
Luré system

Publisher link

10.1109/TCST.2007.902959

Find It

Find It at U of M Libraries

Cite this

@article{b23d8023d2c748d8913dfad5a30345f7,

title = "A review of the systems approach to the analysis of dynamic-mode atomic force microscopy",

abstract = "The atomic force microscope (AFM) is one of the foremost tools for imaging, measuring and manipulating matter at the nanoscale. This brief presents a review of the systems and control approach to analyzing the challenging dynamic-mode operation of the AFM. A Lur{\'e} system perspective of the AFM dynamics facilitates the application of powerful tools from systems theory for the analysis. The harmonic balance method provides significant insights into the steady-state behavior as well as a framework for identifying the tip-sample interaction force. A simple piecewise-linear tip-sample interaction model and its identification using the harmonic balance method is presented. The dominant first harmonic is analyzed using multivalued frequency responses and the corresponding stability conditions. The ability of the simple tip-sample interaction model to capture the intricate nonlinear behavior of the first harmonic is demonstrated. This also points to the importance of studying the higher harmonics to obtain finer details of the tip-sample interaction. The suitability of the Lur{\'e} system perspective for the analysis of the higher harmonics is demonstrated.",

keywords = "Asymptotic methods, Atomic force microscopy (AFM), Dynamic-mode AFM, Harmonic balance, Integral quadratic constraints, Lur{\'e} system",

author = "Abu Sebastian and Anil Gannepalli and Salapaka, {Murti V.}",

note = "Funding Information: Manuscript received February 19, 2007. Manuscript received in final form April 20, 2007. Recommended by Guest Editor S. Devasia. The work of M. Salapaka was supported by the National Science Foundation under Grant CMS 0626171 and Grant ECS 0601571. A. Sebastian is with IBM Research GmbH, Zurich Research Laboratory, 8803 R{\"u}schlikon, Switzerland (e-mail: [email protected]). A. Gannepalli is with Asylum Research Inc., Santa Barbara, CA 93117 USA (e-mail: [email protected]). M. V. Salapaka is with the Department of Electrical and Computer Engineering, Iowa State University, Ames, IA 50011 USA (e-mail: murti@iastate. edu). Color versions of one or more of the figures in this paper are available online at http://ieeexplore.ieee.org. Digital Object Identifier 10.1109/TCST.2007.902959",

year = "2007",

doi = "10.1109/TCST.2007.902959",

language = "English (US)",

volume = "15",

pages = "952--959",

journal = "IEEE Transactions on Control Systems Technology",

issn = "1063-6536",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

number = "5 SPEC. ISS.",

}

TY - JOUR

T1 - A review of the systems approach to the analysis of dynamic-mode atomic force microscopy

AU - Sebastian, Abu

AU - Gannepalli, Anil

AU - Salapaka, Murti V.

N1 - Funding Information: Manuscript received February 19, 2007. Manuscript received in final form April 20, 2007. Recommended by Guest Editor S. Devasia. The work of M. Salapaka was supported by the National Science Foundation under Grant CMS 0626171 and Grant ECS 0601571. A. Sebastian is with IBM Research GmbH, Zurich Research Laboratory, 8803 Rüschlikon, Switzerland (e-mail: [email protected]). A. Gannepalli is with Asylum Research Inc., Santa Barbara, CA 93117 USA (e-mail: [email protected]). M. V. Salapaka is with the Department of Electrical and Computer Engineering, Iowa State University, Ames, IA 50011 USA (e-mail: murti@iastate. edu). Color versions of one or more of the figures in this paper are available online at http://ieeexplore.ieee.org. Digital Object Identifier 10.1109/TCST.2007.902959

PY - 2007

Y1 - 2007

N2 - The atomic force microscope (AFM) is one of the foremost tools for imaging, measuring and manipulating matter at the nanoscale. This brief presents a review of the systems and control approach to analyzing the challenging dynamic-mode operation of the AFM. A Luré system perspective of the AFM dynamics facilitates the application of powerful tools from systems theory for the analysis. The harmonic balance method provides significant insights into the steady-state behavior as well as a framework for identifying the tip-sample interaction force. A simple piecewise-linear tip-sample interaction model and its identification using the harmonic balance method is presented. The dominant first harmonic is analyzed using multivalued frequency responses and the corresponding stability conditions. The ability of the simple tip-sample interaction model to capture the intricate nonlinear behavior of the first harmonic is demonstrated. This also points to the importance of studying the higher harmonics to obtain finer details of the tip-sample interaction. The suitability of the Luré system perspective for the analysis of the higher harmonics is demonstrated.

AB - The atomic force microscope (AFM) is one of the foremost tools for imaging, measuring and manipulating matter at the nanoscale. This brief presents a review of the systems and control approach to analyzing the challenging dynamic-mode operation of the AFM. A Luré system perspective of the AFM dynamics facilitates the application of powerful tools from systems theory for the analysis. The harmonic balance method provides significant insights into the steady-state behavior as well as a framework for identifying the tip-sample interaction force. A simple piecewise-linear tip-sample interaction model and its identification using the harmonic balance method is presented. The dominant first harmonic is analyzed using multivalued frequency responses and the corresponding stability conditions. The ability of the simple tip-sample interaction model to capture the intricate nonlinear behavior of the first harmonic is demonstrated. This also points to the importance of studying the higher harmonics to obtain finer details of the tip-sample interaction. The suitability of the Luré system perspective for the analysis of the higher harmonics is demonstrated.

KW - Asymptotic methods

KW - Atomic force microscopy (AFM)

KW - Dynamic-mode AFM

KW - Harmonic balance

KW - Integral quadratic constraints

KW - Luré system

UR - http://www.scopus.com/inward/record.url?scp=39749085341&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=39749085341&partnerID=8YFLogxK

U2 - 10.1109/TCST.2007.902959

DO - 10.1109/TCST.2007.902959

M3 - Review article

AN - SCOPUS:39749085341

SN - 1063-6536

VL - 15

SP - 952

EP - 959

JO - IEEE Transactions on Control Systems Technology

JF - IEEE Transactions on Control Systems Technology

IS - 5 SPEC. ISS.

ER -

A review of the systems approach to the analysis of dynamic-mode atomic force microscopy

Abstract

Bibliographical note

Keywords

Publisher link

Find It

Other files and links

Fingerprint

Cite this