A method for recording ice ablation using a low-cost ultrasonic rangefinder

M. Len Keeler, Keith A Brugger

    Research output: Contribution to journalArticlepeer-review

    4 Scopus citations


    We have adapted inexpensive ultrasonic rangefinders to measure ablation rates on the surface of a glacier.While ultrasonic rangers are commercially available for this purpose, our goal was to utilize rangefinders typically used in hobby robotics without significantly compromising performance. To correct for environmental factors that affect the speed of sound we use two ultrasonic rangefinders, one focused on a fixed target. Measurements of ablation correlate well with manual measurements with an uncertainty of about ∼3 cm, suggesting an accuracy comparable with other non-manual methods of recording ablation. The limitations of our rangefinder include those inherent in commercially available units as well as having less acoustical power, which results in a reduced effective range of the sensor (∼2m) and difficulties in detecting surfaces lying below low-density snow. Our sensor design provides a cost-effective means of increasing the spatial coverage of ice ablation measurements.

    Original languageEnglish (US)
    Pages (from-to)565-568
    Number of pages4
    JournalJournal of Glaciology
    Issue number209
    StatePublished - Jun 2012

    Bibliographical note

    Copyright 2012 Elsevier B.V., All rights reserved.


    Dive into the research topics of 'A method for recording ice ablation using a low-cost ultrasonic rangefinder'. Together they form a unique fingerprint.

    Cite this