A computational method for determining XBT depths

J. Stark, J. Gorman, M. Hennessey, F. Reseghetti, J. Willis, J. Lyman, J. Abraham, M. Borghini

Research output: Contribution to journalArticlepeer-review

11 Scopus citations

Abstract

A new technique for determining the depth of expendable bathythermographs (XBTs) is developed. This new method uses a forward-stepping calculation which incorporates all of the forces on the XBT devices during their descent. Of particular note are drag forces which are calculated using a new drag coefficient expression. That expression, obtained entirely from computational fluid dynamic modeling, accounts for local variations in the ocean environment. Consequently, the method allows for accurate determination of depths for any local temperature environment. The results, which are entirely based on numerical simulation, are compared with the experiments of LM Sippican T-5 XBT probes. It is found that the calculated depths differ by less than 3% from depth estimates using the standard fall-rate equation (FRE). Furthermore, the differences decrease with depth. The computational model allows an investigation of the fluid flow patterns along the outer surface of the probe as well as in the interior channel. The simulations take account of complex flow phenomena such as laminar-turbulent transition and flow separation.

Original languageEnglish (US)
Pages (from-to)733-743
Number of pages11
JournalOcean Science
Volume7
Issue number6
DOIs
StatePublished - 2011

Fingerprint Dive into the research topics of 'A computational method for determining XBT depths'. Together they form a unique fingerprint.

Cite this