Find Research outputs

Search results

• 3D evaluation of 3DVH program using BANG3 polymer gel dosimeter

  Watanabe, Y. & Nakaguchi, Y., Aug 2013, In: Medical Physics. 40, 8, 082101.

  Research output: Contribution to journal › Article › peer-review

  • Radiation Dosimeters
  • Program Evaluation
  • Polymers
  • Gels
  • Rectum
  23 Scopus citations

• 3D flame measurements at 5 kHz on a jet fueled aviation combustor

  Ma, L., Li, X., Kang, M. W., Lamont, W. G., Venkatesan, K. & Wehe, S., 2015, Ceramics; Controls, Diagnostics and Instrumentation; Education; Manufacturing Materials and Metallurgy; Honors and Awards. American Society of Mechanical Engineers (ASME), (Proceedings of the ASME Turbo Expo; vol. 6).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Combustors
  • Aviation
  • Chemiluminescence
  • Topography
  • Tomography
  1 Scopus citations

• 3D flame topography and curvature measurements at 5 kHz on a premixed turbulent Bunsen flame

  Ma, L., Wu, Y., Lei, Q., Xu, W. & Carter, C. D., Apr 1 2016, In: Combustion and Flame. 166, p. 66-75 10 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • turbulent flames
  • premixed flames
  • Topography
  • Chemiluminescence
  • topography
  24 Scopus citations

• 3D flame topography obtained by tomographic chemiluminescence with direct comparison to planar Mie scattering measurements

  Xu, W., Wickersham, A. J., Wu, Y., He, F. & Ma, L., 2015, In: Applied Optics. 54, 9, p. 2174-2182 9 p.

  Research output: Contribution to journal › Article › peer-review

  • Chemiluminescence
  • chemiluminescence
  • Topography
  • Mie scattering
  • Scattering
  9 Scopus citations

• 3D GABA imaging with real-time motion correction, shim update and reacquisition of adiabatic spiral MRSI

  Bogner, W., Gagoski, B., Hess, A. T., Bhat, H., Tisdall, M. D., van der Kouwe, A. J. W., Strasser, B., Marjańska, M., Trattnig, S., Grant, E., Rosen, B. & Andronesi, O. C., Dec 1 2014, In: NeuroImage. 103, p. 290-302 13 p.

  Research output: Contribution to journal › Article › peer-review

  • gamma-Aminobutyric Acid
  • Spectrum Analysis
  • Glutamic Acid
  • Artifacts
  • Subtraction Technique
  72 Scopus citations

• 3D genome organization contributes to genome instability at fragile sites

  Sarni, D., Sasaki, T., Irony Tur-Sinai, M., Miron, K., Rivera-Mulia, J. C., Magnuson, B., Ljungman, M., Gilbert, D. M. & Kerem, B., Jul 17 2020, In: Nature communications. 11, 1, p. 3613

  Research output: Contribution to journal › Article › peer-review

  • genome
  • Genomic Instability
  • Genes
  • DNA Replication Timing
  • Genome
  3 Scopus citations

• 3D graphics to virtual reality in medicine: Opportunities and prospective

  Gaasedelen, E. N. & Iaizzo, P. A., Jan 1 2018, Engineering in Medicine: Advances and Challenges. Elsevier, p. 201-218 18 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Medical imaging
  • Medicine
  • Tomography
  • Physical properties
  • Virtual reality
  1 Scopus citations

• 3D Hand Scanning to Digital Draping for Glove Design

  Griffin, L., Seifert, E., Curry, C. & Sokolowski, S., Jan 1 2020, Advances in Interdisciplinary Practice in Industrial Design - Proceedings of the AHFE International Conference on Interdisciplinary Practice in Industrial Design, 2019. Shin, C. S. (ed.). Springer Verlag, p. 112-123 12 p. (Advances in Intelligent Systems and Computing; vol. 968).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Scanning
  1 Scopus citations

• 3D Holographic Observatory for Long-term Monitoring of Complex Behaviors in Drosophila

  Kumar, S. S., Sun, Y., Zou, S. & Hong, J., Sep 8 2016, In: Scientific reports. 6, 33001.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Drosophila
  • Diptera
  • Cognitive Aging
  • Leg
  • Datasets
  7 Scopus citations

• 3D hydrodynamic simulations of C ingestion into a convective O shell

  Andrassy, R., Herwig, F., Woodward, P. & Ritter, C., Jan 1 2020, In: Monthly Notices of the Royal Astronomical Society. 491, 1, p. 972-992 21 p.

  Research output: Contribution to journal › Article › peer-review

  • ingestion
  • shell
  • hydrodynamics
  • supernovae
  • luminosity
  6 Scopus citations

• 3-Dimensional nature-based therapeutics in pediatric patients with total pancreatectomy and islet auto-transplant

  Kucher, N., Larson, J. M., Fischer, G., Mertaugh, M., Peterson, L. & Gershan, L. A., Jan 2020, In: Complementary Therapies in Medicine. 48, 102249.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Pancreatectomy
  • Virtual Reality
  • Pediatrics
  • Transplants
  • Equipment and Supplies

• 3 Dimensional photonic scans for measuring body volume and muscle mass in the standing horse

  Valberg, S. J., Borer Matsui, A. K., Firshman, A. M., Bookbinder, L., Katzman, S. A. & Finno, C. J., 2020, In: PloS one. 15, 2, e0229656.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Optics and Photonics
  • photonics
  • Photonics
  • Torso
  • Muscle

• 3-Dimensional printing to predict paravalvular regurgitation after transcatheter aortic valve replacement

  Reiff, C., Zhingre Sanchez, J. D., Mattison, L. M., Iaizzo, P. A., Garcia, S., Raveendran, G. & Gurevich, S., Dec 2020, In: Catheterization and Cardiovascular Interventions. 96, 7, p. E703-E710

  Research output: Contribution to journal › Article › peer-review

  • Three-Dimensional Printing
  • Transcatheter Aortic Valve Replacement
  • Netherlands
  • Calcification of Aortic Valve
  • Tomography
  1 Scopus citations

• 3-dimensional reconstructions of the human coronary artery system using contrast computed tomography of perfusion-fixed specimens

  Spencer, J., Venegoni, M. & Iaizzo, P. A., May 30 2013, In: Journal of Medical Devices, Transactions of the ASME. 7, 2, 020901.

  Research output: Contribution to journal › Article › peer-review

• 3D integration for VLSI systems

  Tan, C. S., Chen, K. N. & Koester, S., Apr 19 2016, Pan Stanford Publishing Pte. Ltd. 377 p.

  Research output: Book/Report › Book

  • Three dimensional integrated circuits
  • very large scale integration
  • integrated circuits
  • Integrated circuits
  • Silicon
  3 Scopus citations

• 3D Integration for VLSI Systems

  Tan, C. S., Chen, K. N. & Koester, S. J., Sep 30 2011, Pan Stanford Publishing Pte. Ltd.

  Research output: Book/Report › Book

  • Three dimensional integrated circuits
  • Integrated circuits
  • Silicon
  • Economics
  • Bandwidth
  17 Scopus citations

• 3D integration technology - Introduction and overview

  Tan, C. S., Koester, S. J. & Chen, K. N., Sep 30 2011, 3D Integration for VLSI Systems. Pan Stanford Publishing Pte. Ltd., p. 1-26 26 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter
  3 Scopus citations

• 3D integration technology-introduction and overview

  Tan, C. S., Koester, S. J. & Chen, K. N., Apr 19 2016, 3D Integration for VLSI Systems. Pan Stanford Publishing Pte. Ltd., p. 2-26 25 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

• 3D late gadolinium enhancement in a single prolonged breath-hold using supplemental oxygenation and hyperventilation

  Roujol, S., Basha, T. A., Akçakaya, M., Foppa, M., Chan, R. H., Kissinger, K. V., Goddu, B., Berg, S., Manning, W. J. & Nezafat, R., Sep 2014, In: Magnetic resonance in medicine. 72, 3, p. 850-857 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Hyperventilation
  • Gadolinium
  • Respiration
  • Acceleration
  • Heart Ventricles
  8 Scopus citations

• 3-D localization of Diabetic Macular Edema using OCT thickness maps

  Roychowdhury, S., Koozekanani, D., Reinsbach, M. & Parhi, K. K., Nov 4 2015, 2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBC 2015. Institute of Electrical and Electronics Engineers Inc., p. 4334-4337 4 p. 7319354. (Proceedings of the Annual International Conference of the IEEE Engineering in Medicine and Biology Society, EMBS; vol. 2015-November).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Microstructure
  4 Scopus citations

• 3D measurements of ignition processes at 20 kHz in a supersonic combustor

  Ma, L., Lei, Q., Wu, Y., Ombrello, T. M. & Carter, C. D., May 1 2015, In: Applied Physics B: Lasers and Optics. 119, 2, p. 313-318 6 p.

  Research output: Contribution to journal › Article › peer-review

  • combustion chambers
  • ignition
  • chemiluminescence
  • fibers
  • projection
  21 Scopus citations

• 3D Microelectronics: Self-Assembled Multifunctional 3D Microdevices (Adv. Electron. Mater. 6/2016)

  Joung, D., Agarwal, K., Park, H. R., Liu, C., Oh, S. H. & Cho, J. H., Jun 1 2016, In: Advanced Electronic Materials. 2, 6, AELM201670035.

  Research output: Contribution to journal › Comment/debate › peer-review

• 3D model processing for high throughput phenotype extraction – the case of corn

  Zermas, D., Morellas, V., Mulla, D. & Papanikolopoulos, N., May 2020, In: Computers and Electronics in Agriculture. 172, 105047.

  Research output: Contribution to journal › Article › peer-review

  • Crops
  • phenotype
  • maize
  • Throughput
  • corn
  3 Scopus citations

• 3D placement and routing

  Zhou, P. & Sapatnekar, S. S., Jan 1 2017, Physical Design for 3D Integrated Circuits. CRC Press, p. 83-100 18 p.

  Research output: Chapter in Book/Report/Conference proceeding › Chapter

  • Communication
  • Temperature control
  • Wire

• 3D point cloud reduction using mixed-integer quadratic programming

  Park, H. S., Wang, Y., Nurvitadhi, E., Hoe, J. C., Sheikh, Y. & Chen, M., 2013, Proceedings - 2013 IEEE Conference on Computer Vision and Pattern Recognition Workshops, CVPRW 2013. p. 229-236 8 p. 6595880. (IEEE Computer Society Conference on Computer Vision and Pattern Recognition Workshops).

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Quadratic programming
  • Calibration
  • Statistics
  • Data storage equipment
  21 Scopus citations

• 3D point cloud segmentation using topological persistence

  Beksi, W. J. & Papanikolopoulos, N. P., Jun 8 2016, 2016 IEEE International Conference on Robotics and Automation, ICRA 2016. Institute of Electrical and Electronics Engineers Inc., Vol. 2016-June. p. 5046-5051 6 p. 7487710

  Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

  • Sampling
  3 Scopus citations

• 3D Printed Anatomical Nerve Regeneration Pathways

  Johnson, B. N., Lancaster, K. Z., Zhen, G., He, J., Gupta, M. K., Kong, Y. L., Engel, E. A., Krick, K. D., Ju, A., Meng, F., Enquist, L. W., Jia, X. & McAlpine, M. C., Oct 1 2015, In: Advanced Functional Materials. 25, 39, p. 6205-6217 13 p.

  Research output: Contribution to journal › Article › peer-review

  • nerves
  • regeneration
  • Printing
  • Scaffolds
  • printing
  146 Scopus citations

• 3D printed bionic ears

  Mannoor, M. S., Jiang, Z., James, T., Kong, Y. L., Malatesta, K. A., Soboyejo, W. O., Verma, N., Gracias, D. H. & McAlpine, M. C., Jun 12 2013, In: Nano letters. 13, 6, p. 2634-2639 6 p.

  Research output: Contribution to journal › Article › peer-review

  • bionics
  • Bionics
  • ear
  • Printing
  • Tissue
  475 Scopus citations

• 3D printed bionic nanodevices

  Kong, Y. L., Gupta, M. K., Johnson, B. N. & McAlpine, M. C., Jun 1 2016, In: Nano Today. 11, 3, p. 330-350 21 p.

  Research output: Contribution to journal › Review article › peer-review

  Open Access

  • Bionics
  • Three-Dimensional Printing
  • Printing
  • Nanostructures
  • Nanostructured materials
  55 Scopus citations

• 3D printed copper-plastic composite material for use as a radiotherapy bolus

  Ehler, E. D. & Sterling, D. A., Aug 2020, In: Physica Medica. 76, p. 202-206 5 p.

  Research output: Contribution to journal › Article › peer-review

  • radiation therapy
  • Copper
  • Plastics
  • plastics
  • copper
  2 Scopus citations

• 3D printed deformable sensors

  Zhu, Z., Park, H. S. & McAlpine, M. C., Jun 2020, In: Science Advances. 6, 25, eaba5575.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Three-Dimensional Printing
  • Printing
  • Polyethylene Glycol Dimethacrylate Hydrogel
  • Physiologic Monitoring
  • Electric Impedance
  6 Scopus citations

• 3D printed electrically-driven soft actuators

  Haghiashtiani, G., Habtour, E., Park, S. H., Gardea, F. & McAlpine, M. C., May 2018, In: Extreme Mechanics Letters. 21, p. 1-8 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Elastomers
  • Actuators
  • Soft materials
  • Skin
  • Materials properties
  41 Scopus citations

• 3D Printed Functional and Biological Materials on Moving Freeform Surfaces

  Zhu, Z., Guo, S. Z., Hirdler, T., Eide, C., Fan, X., Tolar, J. & McAlpine, M. C., Jun 6 2018, In: Advanced Materials. 30, 23, 1707495.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Functional materials
  • Biological materials
  • Printing
  • Hydrogels
  • Real time control
  51 Scopus citations

• 3D-printed mechanochromic materials

  Peterson, G. I., Larsen, M. B., Ganter, M. A., Storti, D. W. & Boydston, A. J., Jan 14 2015, In: ACS Applied Materials and Interfaces. 7, 1, p. 577-583 7 p.

  Research output: Contribution to journal › Article › peer-review

  • spiropyran
  • Printing
  • Polymers
  • Tensile testing
  • polycaprolactone
  164 Scopus citations

• 3D Printed Micro Free-Flow Electrophoresis Device

  Anciaux, S. K., Geiger, M. & Bowser, M. T., Aug 2 2016, In: Analytical Chemistry. 88, 15, p. 7675-7682 8 p.

  Research output: Contribution to journal › Article › peer-review

  • Electrophoresis
  • Printing
  • Glass
  • 3D printers
  • Microfluidics
  46 Scopus citations

• 3D printed nervous system on a chip

  Johnson, B. N., Lancaster, K. Z., Hogue, I. B., Meng, F., Kong, Y. L., Enquist, L. W. & McAlpine, M. C., Apr 21 2016, In: Lab on a chip. 16, 8, p. 1393-1400 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Neurology
  • Nervous System
  • Three-Dimensional Printing
  • Biomimetics
  • Printing
  91 Scopus citations

• 3D Printed Neural Regeneration Devices

  Joung, D., Lavoie, N. S., Guo, S. Z., Park, S. H., Parr, A. M. & McAlpine, M. C., Jan 1 2020, In: Advanced Functional Materials. 30, 1, 1906237.

  Research output: Contribution to journal › Article › peer-review

  • regeneration
  • Printing
  • printing
  • Cell signaling
  • Biomolecules
  7 Scopus citations

• 3D Printed Organ Models for Surgical Applications

  Qiu, K., Haghiashtiani, G. & McAlpine, M. C., Jun 12 2018, In: Annual Review of Analytical Chemistry. 11, p. 287-306 20 p.

  Research output: Contribution to journal › Review article › peer-review

  Open Access

  • Planning
  • Printing
  • Computerized tomography
  • Visualization
  • Feedback
  22 Scopus citations

• 3D Printed Organ Models with Physical Properties of Tissue and Integrated Sensors

  Qiu, K., Zhao, Z., Haghiashtiani, G., Guo, S. Z., He, M., Su, R., Zhu, Z., Bhuiyan, D. B., Murugan, P., Meng, F., Park, S. H., Chu, C. C., Ogle, B. M., Saltzman, D. A., Konety, B. R., Sweet, R. M. & McAlpine, M. C., Mar 2018, In: Advanced Materials Technologies. 3, 3, 1700235.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Physical properties
  • Tissue
  • Sensors
  • Ink
  • Pressure sensors
  29 Scopus citations

• 3D printed patient-specific aortic root models with internal sensors for minimally invasive applications

  Haghiashtiani, G., Qiu, K., Sanchez, J. D. Z., Fuenning, Z. J., Nair, P., Ahlberg, S. E., Iaizzo, P. A. & McAlpine, M. C., Aug 2020, In: Science Advances. 6, 35, eabb4641.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Transcatheter Aortic Valve Replacement
  • Three-Dimensional Printing
  • Minimally Invasive Surgical Procedures
  • Aortic Valve Stenosis
  • In Vitro Techniques
  3 Scopus citations

• 3D Printed Polymer Photodetectors

  Park, S. H., Su, R., Jeong, J., Guo, S. Z., Qiu, K., Joung, D., Meng, F. & McAlpine, M. C., Aug 28 2018, (E-pub ahead of print) In: Advanced Materials. 30, 40, 1803980.

  Research output: Contribution to journal › Article › peer-review

  • Photodetectors
  • Printing
  • Polymers
  • Microfabrication
  • Optoelectronic devices
  37 Scopus citations

• 3D Printed Programmable Release Capsules

  Gupta, M. K., Meng, F., Johnson, B. N., Kong, Y. L., Tian, L., Yeh, Y. W., Masters, N., Singamaneni, S. & McAlpine, M. C., Aug 12 2015, In: Nano letters. 15, 8, p. 5321-5329 9 p.

  Research output: Contribution to journal › Article › peer-review

  • capsules
  • Nanorods
  • Biomolecules
  • Capsules
  • Hydrogels
  89 Scopus citations

• 3D printed quantum dot light-emitting diodes

  Kong, Y. L., Tamargo, I. A., Kim, H., Johnson, B. N., Gupta, M. K., Koh, T. W., Chin, H. A., Steingart, D. A., Rand, B. P. & McAlpine, M. C., Dec 10 2014, In: Nano letters. 14, 12, p. 7017-7023 7 p.

  Research output: Contribution to journal › Article › peer-review

  • Semiconductor quantum dots
  • Light emitting diodes
  • printing
  • light emitting diodes
  • quantum dots
  251 Scopus citations

• 3D printed self-supporting elastomeric structures for multifunctional microfluidics

  Su, R., Wen, J., Su, Q., Wiederoder, M. S., Koester, S. J., Uzarski, J. R. & McAlpine, M. C., Oct 7 2020, In: Science Advances. 6, 41, eabc9846.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • elastomeric
  • Printing
  • Microfluidics
  • Ink
  • Automation
  1 Scopus citations

• 3D-printed slit nozzles for Fourier transform microwave spectroscopy

  Dewberry, C. T., Mackenzie, R. B., Green, S. & Leopold, K. R., Jun 1 2015, In: Review of Scientific Instruments. 86, 6, 065107.

  Research output: Contribution to journal › Article › peer-review

  • Microwave spectroscopy
  • Fourier transforms
  • microwave spectrometers
  • nozzles
  • slits
  16 Scopus citations

• 3D Printed Stem-Cell Derived Neural Progenitors Generate Spinal Cord Scaffolds

  Joung, D., Truong, V., Neitzke, C. C., Guo, S. Z., Walsh, P. J., Monat, J. R., Meng, F., Park, S. H., Dutton, J. R., Parr, A. M. & McAlpine, M. C., Sep 26 2018, In: Advanced Functional Materials. 28, 39, 1801850.

  Research output: Contribution to journal › Article › peer-review

  • Stem cells
  • spinal cord
  • stem cells
  • Scaffolds
  • Neurology
  60 Scopus citations

• 3D Printed Stretchable Tactile Sensors

  Guo, S. Z., Qiu, K., Meng, F., Park, S. H. & Mcalpine, M. C., Jul 2017, In: Advanced Materials. 29, 27, 1701218.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Wearable technology
  • Functional materials
  • Printing
  • Sensors
  • Skin
  162 Scopus citations

• 3D Printing a Susceptibility Assay for Multidrug-Resistant Bacteria

  Han, R. S., Haghiashtiani, G. & McAlpine, M. C., Sep 1 2016, In: Chem. 1, 3, p. 346-348 3 p.

  Research output: Contribution to journal › Short survey › peer-review

  Open Access

  • Three-Dimensional Printing
  • Pathogens
  • Preclinical Drug Evaluations
  • Assays
  • Bacteria
  1 Scopus citations

• 3D printing-enabled DNA extraction for long-read genomics

  Agrawal, P., Reifenberger, J. G. & Dorfman, K. D., Aug 25 2020, In: ACS Omega. 5, 33, p. 20817-20824 8 p.

  Research output: Contribution to journal › Article › peer-review

  Open Access

  • Genomics
  • DNA
  • Printing
  • Molecules
  • Nanopores

• 3D printing of a multifunctional nanocomposite helical liquid sensor

  Guo, S. Z., Yang, X., Heuzey, M. C. & Therriault, D., Apr 21 2015, In: Nanoscale. 7, 15, p. 6451-6456 6 p.

  Research output: Contribution to journal › Article › peer-review

  • Nanocomposites
  • Printing
  • Liquids
  • Sensors
  • Electric Conductivity
  76 Scopus citations