If you made any changes in Pure these will be visible here soon.
Filter
Conference contribution

Search results

  • 2020

    MORPHOLOGY and MECHANICAL PERFORMANCE of PIPE GRADE HDPE EXPOSED to CHLORINATED WATER

    Hagen, A., Mantell, S. C. & Bhattacharya, M., 2020, SPE ANTEC 2020: The Annual Technical Conference for Plastic Professionals. Society of Plastics Engineers, p. 824-829 6 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • REDUCED ORDER KINETIC MODEL FOR CORROSION OF HIGH-DENSITY POLYETHYLENE IN BLEACH SOLUTIONS

    Tripathi, A., Le, J. L. & Mantell, S., 2020, SPE ANTEC 2020: The Annual Technical Conference for Plastic Professionals. Society of Plastics Engineers, p. 835-839 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2017

    Effect of aging in hot chlorinated water on the mechanical behavior of polypropylene for solar-thermal applications

    Fischer, J., Mantell, S. C., Bradler, P. R., Wallner, G. M. & Lang, R. W., 2017, ISES Solar World Congress 2017 - IEA SHC International Conference on Solar Heating and Cooling for Buildings and Industry 2017, Proceedings. Renne, D., Griffiths, S., Romero, M., Guthrie, K. & Mugnier, D. (eds.). International Solar Energy Society, p. 1987-1992 6 p. (ISES Solar World Congress 2017 - IEA SHC International Conference on Solar Heating and Cooling for Buildings and Industry 2017, Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations
  • Method for degrading polyethylene sheet samples in an oxidative environment

    Cosgriff, E., Mantell, S. & Bhattacharya, M., 2017, 75th Annual Technical Conference and Exhibition of the Society of Plastics Engineers, SPE ANTEC Anaheim 2017. Society of Plastics Engineers, p. 1228-1233 6 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2017-May).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    9 Scopus citations
  • 2014

    Modeling polymer failure under creep loading through simulation of crack growth

    Ge, H., Li, H. & Mantell, S. C., 2014, 72nd Annual Technical Conference of the Society of Plastics Engineers, ANTEC 2014: The Plastics Conference. January ed. Society of Plastics Engineers, p. 1281-1286 6 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2, no. January).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Scopus citations
  • Size effect on the fracture properties of nuclear graphite

    Singh, G., Li, H., Fok, A. & Mantell, S., Jan 1 2014, Graphite Testing for Nuclear Applications: The Significance of Test Specimen Volume and Geometry and the Statistical Significance of Test Specimen Population. Carroll, M. C. & Tzelepi, A. (eds.). ASTM International, p. 199-217 19 p. (ASTM Special Technical Publication; vol. STP 1578).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations
  • The effect of a thermotropic material on the optical efficiency and stagnation temperature of a polymer flat plate solar collector

    Gladen, A. C., Davidson, J. H. & Mantell, S. C., Jan 1 2014, ASME 2014 8th International Conference on Energy Sustainability, ES 2014 Collocated with the ASME 2014 12th International Conference on Fuel Cell Science, Engineering and Technology. Web Portal ASME (American Society of Mechanical Engineers), (ASME 2014 8th International Conference on Energy Sustainability, ES 2014 Collocated with the ASME 2014 12th International Conference on Fuel Cell Science, Engineering and Technology; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2013

    A parametric numerical study of radiative transfer in thermotropic materials

    Gladen, A. C., Mantell, S. C. & Davidson, J. H., Dec 1 2013, ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013. V001T01A002. (ASME 2013 Heat Transfer Summer Conf. Collocated with the ASME 2013 7th Int. Conf. on Energy Sustainability and the ASME 2013 11th Int. Conf. on Fuel Cell Science, Engineering and Technology, HT 2013; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Investigation of fracture in polymers using a cohesive zone model

    Ge, H., Li, H. & Mantell, S. C., Jan 1 2013, 71st Annual Technical Conference of the Society of Plastics Engineers 2013, ANTEC 2013. Society of Plastics Engineers, p. 2057-2061 5 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Wind turbine blades as a strain energy source for energy harvesting

    Lim, D. W., Mantell, S. C., Seiler, P. J. & Yang, R., Aug 19 2013, 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition 2013. (51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition 2013).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations
  • 2012

    Evaluating fracture toughness in degraded polymeric thin films

    Ge, H. & Mantell, S. C., Sep 10 2012, 70th Annual Technical Conference of the Society of Plastics Engineers 2012, ANTEC 2012. p. 1303-1308 6 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • 2011

    Durability of polymers for solar thermal applications: Crack propagation in degraded polymers

    Singh, G., Mantell, S. C. & Davidson, J. H., Dec 1 2011, 40th ASES National Solar Conference 2011, SOLAR 2011. p. 521-526 6 p. (40th ASES National Solar Conference 2011, SOLAR 2011; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Prediction of degradation of polymer tubes used in solar domestic hot water components

    Singh, G., Mantell, S. C. & Davidson, J. H., Aug 23 2011, 69th Annual Technical Conference of the Society of Plastics Engineers 2011, ANTEC 2011. p. 2746-2751 6 p. (Annual Technical Conference - ANTEC, Conference Proceedings; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2010

    Prediction of degradation of polyolefins used in solar domestic hot water components

    Camisa, W., Mantell, S. C., Davidson, J. H. & Singh, G., Dec 1 2010, ASME 2010 4th International Conference on Energy Sustainability, ES 2010. p. 301-308 8 p. (ASME 2010 4th International Conference on Energy Sustainability, ES 2010; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Scopus citations
  • 2009

    Shear induced removal of calcium carbonate scale from polypropylene and copper tubes

    Royer, M., Davidson, J. H., Francis, L. F. & Mantell, S. C., Dec 1 2009, Proceedings of the ASME 3rd International Conference on Energy Sustainability 2009, ES2009. p. 727-739 13 p. (Proceedings of the ASME 3rd International Conference on Energy Sustainability 2009, ES2009; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Thermo-fluid experiments supporting microfabricated regenerator development for a stirling space power engine

    Sun, L., Simon, T. W., Mantell, S. C., Ibrahim, M. B., Gedeon, D. & Tew, R., 2009, 7th International Energy Conversion Engineering Conference. American Institute of Aeronautics and Astronautics Inc., 2009-4579. (7th International Energy Conversion Engineering Conference).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    6 Scopus citations
  • 2008

    Jet penetration into a scaled microfabricated Stirling cycle regenerator

    Sun, L., Simon, T. W., Mantell, S. C., Ibrahim, M., Gedeon, D. & Tew, R., 2008, 6th International Energy Conversion Engineering Conference, IECEC. American Institute of Aeronautics and Astronautics Inc., 2008-5719. (6th International Energy Conversion Engineering Conference, IECEC).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Performance and reliability of MEMS coatings in liquids

    Ali, S. M., Mantell, S. C. & Longmire, E. K., Dec 1 2008, 2008 IEEE Sensors, SENSORS 2008. p. 152-155 4 p. 4716406. (Proceedings of IEEE Sensors).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations
  • 2007

    A microfabricated involute-foil regenerator for stirling engines

    Tew, R., Ibrahim, M., Danila, D., Simon, T., Mantell, S., Sun, L., Gedeon, D., Kelly, K., McLean, J., Wood, G. & Qiu, S., Nov 6 2007, Collection of Technical Papers - 5th International Energy Conversion Engineering Conference. p. 326-350 25 p. (Collection of Technical Papers - 5th International Energy Conversion Engineering Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Scopus citations
  • Options for an energy efficient panelized residential roof

    Davidson, J. H., Mantell, S. C., Briscoe, C., Schoenbauer, B., Huang, D. & Carmody, J., 2007, American Solar Energy Society - Solar 2007: 36th ASES Annual Conf., 32nd National Passive Solar Conf., 2nd Renewable Energy Policy and Marketing Conference: Sustainable Energy Puts America to Work. p. 623-630 8 p. (American Solar Energy Society - Solar 2007: 36th ASES Annual Conf., 32nd National Passive Solar Conf., 2nd Renewable Energy Policy and Marketing Conference: Sustainable Energy Puts America to Work; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Scaling analysis and a critical thickness criterion for thermosetting composites

    Secord, T. W., Stelson, K. A. & Mantell, S. C., Dec 28 2007, Proceedings of the Materials Division, The ASME Non-Destructive Evaluation Division and The ASME Pressure Vessels and Piping Division, 2006. p. 205-212 8 p. (Proceedings of the Materials Division, The ASME Non-Destructive Evaluation Division and The ASME Pressure Vessels and Piping Division, 2006).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Testing reliability of MEMS materials in liquids

    Kuehn, T. P., Ali, S. M., Mantell, S. C. & Longmire, E. K., Apr 30 2007, Reliability, Packaging, Testing, and Characterization of MEMS/MOEMS VI. Vol. 6463. 64630L

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Scopus citations
  • 2006

    A model of antioxident loss in polymer tubes: Prediction of life for SDHW

    Mantell, S. C., Davidson, J. H. & Su, Y., Dec 1 2006, American Solar Energy Society - Solar 2006: 35th ASES Annual Conf., 31st ASES National Passive Solar Conf., 1st ASES Policy and Marketing Conf., ASME Solar Energy Division Int. Solar Energy Conference. p. 130-135 6 p. (American Solar Energy Society - Solar 2006: 35th ASES Annual Conf., 31st ASES National Passive Solar Conf., 1st ASES Policy and Marketing Conf., ASME Solar Energy Division Int. Solar Energy Conference; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • A model of antioxident loss in polymer tubes: Prediction of life for SDHW

    Mantell, S. C., Davidson, J. H. & Su, Y., Dec 1 2006, Proceedings of the ASME International Solar Energy Conference - Solar Engineering 2006. (International Solar Energy Conference; vol. 2006).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Reliability of cyclically actuated silicon microcantilevers in liquid environments

    Ali, S. M., Mantell, S. C. & Longmire, E. K., Jan 1 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Microelectromechanical Systems. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Micro-Electro Mechanical Systems Division, (Publications) MEMS).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • Reliability of microcantilevers in liquid environments

    Ali, S. M., Mantell, S. C. & Longmire, E. K., May 3 2006, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 6111. 61110C

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    7 Scopus citations
  • 2005

    Assessing the performance of a microfabricated regenerator for Stirling space-power convertor

    Ibrahim, M. B., Keister, J., Sun, L., Simon, T., Mantell, S. C., Gedeon, D., Guidry, D., Qiu, S. & Wood, G., 2005, Collection of Technical Papers - 3rd International Energy Conversion Engineering Conference. American Institute of Aeronautics and Astronautics Inc., p. 830-845 16 p. (Collection of Technical Papers - 3rd International Energy Conversion Engineering Conference; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations
  • Failure of multilayered viscoelastic polymers

    Wu, C., Mantell, S. C. & Davidson, J. H., Dec 1 2005, 20th Technical Conference of the American Society for Composites 2005. p. 1777-1789 13 p. (20th Technical Conference of the American Society for Composites 2005; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Mechanical behavior of random fiber composite perforated plates

    Eggen, M., Hambleton, J., Mantell, S. C. & Davidson, J., Dec 1 2005, 20th Technical Conference of the American Society for Composites 2005. p. 1192-1204 13 p. (20th Technical Conference of the American Society for Composites 2005; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Mechanical performance of polymer tubes intended for use in solar heat exchangers

    Freeman, A., Mantell, S. C. & Davidson, J. H., 2005, Proceedings of the Solar World Congress 2005: Bringing Water to the World, Including Proceedings of 34th ASES Annual Conference and Proceedings of 30th National Passive Solar Conference. p. 821-829 9 p. (Proceedings of the Solar World Congress 2005: Bringing Water to the World, Including Proceedings of 34th ASES Annual Conference and Proceedings of 30th National Passive Solar Conference; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Numerical simulation of flow field and heat transfer of streamlined cylinders in crossflow

    Li, Z., Davidson, J. & Mantell, S., Dec 1 2005, Proceedings of the ASME Summer Heat Transfer Conference, HT 2005. p. 531-541 11 p. HT2005-72024. (Proceedings of the ASME Summer Heat Transfer Conference; vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    11 Scopus citations
  • 2004

    A survey of microfabrication techniques for use in stirling engine regenerators

    Sun, L., Mantell, S. C., Gedeon, D. & Simon, T. W., 2004, Collection of Technical Papers - 2nd International Energy Conversion Engineering Conference. p. 1058-1070 13 p. (Collection of Technical Papers - 2nd International Energy Conversion Engineering Conference; vol. 2).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    5 Scopus citations
  • 2003

    A modeling approach based on laminated plate theory to design microbeams

    Mantell, S. C., Longmire, E. & Wolters, D., Dec 1 2003, 2003 Nanotechnology Conference and Trade Show - Nanotech 2003. Laudon, M. & Romanowicz, B. (eds.). p. 490-493 4 p. (2003 Nanotechnology Conference and Trade Show - Nanotech 2003; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Effects of cantilever aspect ratio and liquid-solid suspensions on resonance in a confined cavity

    Naik, T., Longmire, E. K. & Mantell, S. C., 2003, Proceedings of the 4th ASME/JSME Joint Fluids Engineering Conference: Volume 2, Part A, Symposia. Ogut, A., Tsuji, Y. & Kawahashi, M. (eds.). American Society of Mechanical Engineers, p. 101-107 7 p. (Proceedings of the ASME/JSME Joint Fluids Engineering Conference; vol. 2 A).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • Heat transfer enhancement using shaped polymer tubes: Fin analysis

    Li, Z., Davidson, J. H. & Mantell, S. C., Dec 1 2003, Proceedings of the 003 ASME Summer Heat Transfer Conference, Volume 1. p. 679-685 7 p. (Proceedings of the ASME Summer Heat Transfer Conference; vol. 2003).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • MEMS for drug screening applications

    Zhou, J., Zürn, S., Markus, D., Mantell, S., Polla, D. & Smith, G., 2003, 2003 Nanotechnology Conference and Trade Show - Nanotech 2003. Laudon, M. & Romanowicz, B. (eds.). p. 134-137 4 p. (2003 Nanotechnology Conference and Trade Show - Nanotech 2003; vol. 1).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

  • 2002

    Natural convection from a horizontal tube heat exchanger immersed in a tilted enclosure

    Liu, W., Davidson, J. H., Kulacki, F. A. & Mantell, S. C., Dec 24 2002, International Solar Energy Conference. Boise Pearson, J. & Farhi, B. N. (eds.). p. 65-74 10 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations
  • 2001

    Calibration of MEMS strain sensors fabricated on silicon

    Cao, L., Zhou, J., Kim, T. S., Hautamaki, C. & Mantell, S. C., 2001, Micro-Electro-Mechanical Systems (MEMS) - 2001. Lee, A. L., Simon, J., Breuer, K., Chen, S., Keynton, R. S., Malshe, A., Mou, J-I. & Dunn, M. (eds.). p. 383-390 8 p. (American Society of Mechanical Engineers, Micro-Electromechanical Systems Division Publication (MEMS); vol. 3).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    1 Scopus citations
  • 2000

    Implantable medical drug delivery systems using microelectromechanical systems technology

    Cao, L., Mantell, S. C. & Polla, D., Jan 1 2000, 1st Annual International IEEE-EMBS Special Topic Conference on Microtechnologies in Medicine and Biology - Proceedings. Dittmar, A. & Beebe, D. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 487-490 4 p. 893832. (1st Annual International IEEE-EMBS Special Topic Conference on Microtechnologies in Medicine and Biology - Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    19 Scopus citations
  • MEMS-based diagnostic microsystems

    Polla, D. L., Krulevitch, P., Wang, A., Smith, G., Diaz, J., Mantell, S., Zhou, J., Zurn, S., Nam, Y., Cao, L., Hamilton, J., Fuller, C. & Gascoyne, P., 2000, 1st Annual International IEEE-EMBS Special Topic Conference on Microtechnologies in Medicine and Biology - Proceedings. Dittmar, A. & Beebe, D. (eds.). Institute of Electrical and Electronics Engineers Inc., p. 41-44 4 p. 893737. (1st Annual International IEEE-EMBS Special Topic Conference on Microtechnologies in Medicine and Biology - Proceedings).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    10 Scopus citations
  • 1998

    Applied research in remotely queried embedded microsensors

    Krantz, D. G., Belk, J. H., Dubow, J., Hautamaki, C., Mantell, S. C., Polla, D. L. & Zurn, S. M., 1998, Proceedings of SPIE - The International Society for Optical Engineering. Vol. 3328. p. 124-132 9 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    10 Scopus citations
  • Modeling and control of the in-situ thermoplastic composite tape-laying process

    Sun, W. C., Mantell, S. C. & Stelson, K. A., Dec 1 1998, Proceedings of the 1998 American Control Conference, ACC 1998. p. 2170-2175 6 p. 703012. (Proceedings of the American Control Conference; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    3 Scopus citations
  • Real-time sensing and control of resin flow in liquid injection molding processes

    Parthasarathy, S., Mantell, S. C., Stelson, K. A., Bickerton, S. & Advani, S. G., Dec 1 1998, Proceedings of the 1998 American Control Conference, ACC 1998. p. 2181-2184 4 p. 703014. (Proceedings of the American Control Conference; vol. 4).

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    9 Scopus citations
  • 1995

    Optimization of autoclave curing of composites: an expert system approach

    Watkins, E., Mantell, S. C. & Ciriscioli, P. R., Dec 1 1995, ASME Materials Division. Boyce, M. C. (ed.). ASME, Vol. 69-2. p. 931-946 16 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    2 Scopus citations
  • Thermoset filament winding process model and parametric study

    Sun, L., Mantell, S. C., Banerjee, A. & Cohen, D., Dec 1 1995, ASME Materials Division. Boyce, M. C. (ed.). ASME, Vol. 69-1. p. 11-23 13 p.

    Research output: Chapter in Book/Report/Conference proceedingConference contribution

    4 Scopus citations