1977 …2020
If you made any changes in Pure, your changes will be visible here soon.

Research Output 1977 2019

Filter
Conference contribution
2019
1 Citation (Scopus)

A dynamical model for a hydrostatic wind turbine transmission coupled to the grid with a synchronous generator

Mohanty, B., Dhople, S. & Stelson, K. A., Jul 1 2019, 2019 American Control Conference, ACC 2019. Institute of Electrical and Electronics Engineers Inc., p. 5774-5779 6 p. 8814746. (Proceedings of the American Control Conference; vol. 2019-July).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Synchronous generators
Wind turbines
Topology
Power electronics
Energy conversion
2018

Addressing valves with pressure ripple

Foss, R. J., Li, M., Barth, E. J., Stelson, K. A. & Van De Ven, J. D., Jan 1 2018, BATH/ASME 2018 Symposium on Fluid Power and Motion Control, FPMC 2018. American Society of Mechanical Engineers (ASME), (BATH/ASME 2018 Symposium on Fluid Power and Motion Control, FPMC 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydraulics
Resonators
Capacitors
Fluids
Orifices
1 Citation (Scopus)

High fidelity dynamic modeling and control of power regenerative hydrostatic wind turbine test platform

Mohanty, B. & Stelson, K. A., Jan 1 2018, BATH/ASME 2018 Symposium on Fluid Power and Motion Control, FPMC 2018. American Society of Mechanical Engineers (ASME), (BATH/ASME 2018 Symposium on Fluid Power and Motion Control, FPMC 2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wind turbines
Rotors
Plant startup
Turbines
Hydraulics
2017
1 Citation (Scopus)

A design optimization model for an alternating flow (AF) hydraulic pump based on first principles

Li, M., Foss, R., Stelson, K. A., Van De Ven, J. D. & Barth, E. J., Jan 1 2017, Vibration in Mechanical Systems; Modeling and Validation; Dynamic Systems and Control Education; Vibrations and Control of Systems; Modeling and Estimation for Vehicle Safety and Integrity; Modeling and Control of IC Engines and Aftertreatment Systems;Unmanned Aerial Vehicles (UAVs) and Their Applications; Dynamics and Control of Renewable Energy Systems; Energy Harvesting; Control of Smart Buildings and Microgrids; Energy Systems. American Society of Mechanical Engineers, (ASME 2017 Dynamic Systems and Control Conference, DSCC 2017; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydraulics
Pumps
Displacement control
Energy dissipation
Actuators
1 Citation (Scopus)

A novel digitalized hydrostatic drive solution for modern wind turbine

Chen, J., Wang, F. & Stelson, K. A., Jan 1 2017, ASME/BATH 2017 Symposium on Fluid Power and Motion Control, FPMC 2017. American Society of Mechanical Engineers, (ASME/BATH 2017 Symposium on Fluid Power and Motion Control, FPMC 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wind turbines
Turbines
Costs
Pumps
Hydraulic motors
1 Citation (Scopus)

Dynamic model of a novel alternating flow (AF) hydraulic pump

Li, M. M., Foss, R., Stelson, K. A., Van de Ven, J. D. & Barth, E. J., Jan 1 2017, ASME/BATH 2017 Symposium on Fluid Power and Motion Control, FPMC 2017. American Society of Mechanical Engineers, (ASME/BATH 2017 Symposium on Fluid Power and Motion Control, FPMC 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamic models
Hydraulics
Pumps
Displacement control
Controllability
1 Citation (Scopus)

Experimental studies of a novel alternating flow (AF) hydraulic pump

Foss, R. J., Li, M., Barth, E. J., Stelson, K. A. & Van de Ven, J. D., Jan 1 2017, ASME/BATH 2017 Symposium on Fluid Power and Motion Control, FPMC 2017. American Society of Mechanical Engineers, (ASME/BATH 2017 Symposium on Fluid Power and Motion Control, FPMC 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydraulics
Pumps
Pistons
Sprockets
Displacement control
2 Citations (Scopus)

Modeling and design of a hydraulic hybrid powertrain for passenger vehicle

Zhang, H., Wang, F. & Stelson, K. A., Jan 1 2017, ASME/BATH 2017 Symposium on Fluid Power and Motion Control, FPMC 2017. American Society of Mechanical Engineers, (ASME/BATH 2017 Symposium on Fluid Power and Motion Control, FPMC 2017).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hybrid powertrains
Hydraulics
Hydraulic drives
Energy management
Hydraulic accumulators
2016

A three-dimensional CFD methodology to study vane-ring and vane-under-vane interactions of a vane pump power split transmission

Frosina, E., Senatore, A., Buono, D., Stelson, K. A., Wang, F. & Gao, H., Jan 1 2016, 9th FPNI Ph.D. Symposium on Fluid Power, FPNI 2016. American Society of Mechanical Engineers, (9th FPNI Ph.D. Symposium on Fluid Power, FPNI 2016).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vane pumps
Power transmission
Pump
Computational fluid dynamics
Ring
2015

Performance study of vane pump power split transmission for a highway vehicle

Mohanty, B., Wang, F. & Stelson, K. A., Jan 1 2015, ASME/BATH 2015 Symposium on Fluid Power and Motion Control, FPMC 2015. American Society of Mechanical Engineers, (ASME/BATH 2015 Symposium on Fluid Power and Motion Control, FPMC 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vane pumps
Power transmission
Engines
Hydraulic motors
Hydraulic drives
10 Citations (Scopus)

Vane pump power split transmission: Three dimensional computational fluid dynamics modeling

Frosina, E., Senatore, A., Buono, D., Stelson, K. A., Wang, F., Mohanty, B. & Gust, M. J., Jan 1 2015, ASME/BATH 2015 Symposium on Fluid Power and Motion Control, FPMC 2015. American Society of Mechanical Engineers, (ASME/BATH 2015 Symposium on Fluid Power and Motion Control, FPMC 2015).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Vane pumps
Power transmission
Computational fluid dynamics
Hydraulics
Pumps
2014
7 Citations (Scopus)

A novel pressure-controlled hydro-mechanical transmission

Wang, F. & Stelson, K. A., Jan 1 2014, ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC 2014. Web Portal ASME (American Society of Mechanical Engineers), (ASME/BATH 2014 Symposium on Fluid Power and Motion Control, FPMC 2014).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hydraulic drives
Vane pumps
Fans
Torque
Hydraulic motors
2013
4 Citations (Scopus)

Investigation on the energy management strategy for hydraulic hybrid wheel loaders

Wang, F., Mohd Zulkefli, M. A., Sun, Z. & Stelson, K. A., Jan 1 2013, Aerial Vehicles; Aerospace Control; Alternative Energy; Automotive Control Systems; Battery Systems; Beams and Flexible Structures; Biologically-Inspired Control and its Applications;. American Society of Mechanical Engineers (ASME), V001T11A005. (ASME 2013 Dynamic Systems and Control Conference, DSCC 2013; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Loaders
Energy management
Wheels
Hydraulics
Engines
2012
1 Citation (Scopus)

Analysis of short-term energy storage for mid-size hydrostatic wind turbine

Dutta, R., Wang, F., Bohlmann, B. & Stelson, K. A., Dec 1 2012, ASME 2012 5th Annual Dynamic Systems and Control Conference Joint with the JSME 2012 11th Motion and Vibration Conference, DSCC 2012-MOVIC 2012. Vol. 2. p. 813-822 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Wind turbines
Energy storage
Turbulence
Hydraulic accumulators
Energy management
1 Citation (Scopus)

An energy management strategy for a hydraulic hybrid vehicle

Deppen, T. O., Alleyne, A. G., Stelson, K. & Meyer, J., Nov 26 2012, 2012 American Control Conference, ACC 2012. p. 1335-1341 7 p. 6315396. (Proceedings of the American Control Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Energy management
Hybrid vehicles
Powertrains
Hydraulics
Model predictive control

Sensitivity analysis of energy management strategies for hydraulic hybrid vehicles

Deppen, T. O., Alleyne, A. G., Stelson, K. A. & Meyer, J. J., Dec 1 2012, ASME 2012 5th Annual Dynamic Systems and Control Conference Joint with the JSME 2012 11th Motion and Vibration Conference, DSCC 2012-MOVIC 2012. Vol. 1. p. 129-136 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Energy management
Hybrid vehicles
Hybrid powertrains
Sensitivity analysis
Hydraulics
2011
22 Citations (Scopus)

A model predictive control approach for a parallel hydraulic hybrid powertrain

Deppen, T. O., Alleyne, A. G., Stelson, K. A. & Meyer, J., Sep 29 2011, Proceedings of the 2011 American Control Conference, ACC 2011. p. 2713-2718 6 p. 5991128. (Proceedings of the American Control Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hybrid powertrains
Model predictive control
Hydraulics
Hybrid vehicles
Brakes
1 Citation (Scopus)

Model predictive control of an electro-hydraulic powertrain with energy storage

Deppen, T. O., Alleyne, A. G., Stelson, K. A. & Meyer, J. J., Dec 1 2011, ASME 2011 Dynamic Systems and Control Conference and Bath/ASME Symposium on Fluid Power and Motion Control, DSCC 2011. p. 225-232 8 p. (ASME 2011 Dynamic Systems and Control Conference and Bath/ASME Symposium on Fluid Power and Motion Control, DSCC 2011; vol. 2).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Powertrains
Model predictive control
Energy storage
Hydraulics
Hybrid powertrains
2010

Nonlinear tracking control of a transient hydrostatic dynamometer for hybrid powertrain research

Wang, Y., Sun, Z. & Stelson, K. A., Dec 1 2010, ASME 2010 Dynamic Systems and Control Conference, DSCC2010. p. 61-68 8 p. (ASME 2010 Dynamic Systems and Control Conference, DSCC2010; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Hybrid powertrains
Dynamometers
Pressure control
Engines
Bandwidth
14 Citations (Scopus)

Predictive energy management for parallel hydraulic hybrid passenger vehicle

Deppen, T. O., Alleyne, A. G., Stelson, K. A. & Meyer, J. J., Dec 1 2010, ASME 2010 Dynamic Systems and Control Conference, DSCC2010. Vol. 2. p. 185-192 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Energy management
Model predictive control
Hydraulics
Engines
Hybrid vehicles
2009
3 Citations (Scopus)

Modeling and tracking control of a hydrostatic dynamometer

Wang, Y., Sun, Z. & Stelson, K. A., Nov 23 2009, 2009 American Control Conference, ACC 2009. p. 1391-1396 6 p. 5160567. (Proceedings of the American Control Conference).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Dynamometers
Torque
Feedback linearization
Pressure control
Powertrains
2007

Scaling analysis and a critical thickness criterion for thermosetting composites

Secord, T. W., Stelson, K. A. & Mantell, S. C., Dec 28 2007, Proceedings of the Materials Division, The ASME Non-Destructive Evaluation Division and The ASME Pressure Vessels and Piping Division, 2006. p. 205-212 8 p. (Proceedings of the Materials Division, The ASME Non-Destructive Evaluation Division and The ASME Pressure Vessels and Piping Division, 2006).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Composite materials
Temperature
Curing
Numerical analysis
Resins
2006
1 Citation (Scopus)

Active control of sound transmission through windows with carbon nanotube based transparent actuators and moving noise source identification

Yu, X., Rajamani, R., Stelson, K. A. & Cui, T., Dec 1 2006, Proceedings of the 2006 American Control Conference. Vol. 2006. p. 1227-1232 6 p. 1656385

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon nanotubes
Actuators
Acoustic waves
Control systems
Microphones

Fabrication of integrated pressure-flow-temperature sensor for hydraulic systems

Groepper, C. W., Cui, T., Li, P. Y. & Stelson, K. A., Jan 1 2006, Proceedings of 2006 ASME International Mechanical Engineering Congress and Exposition, IMECE2006 - Fluid Power Systems and Technology Division. American Society of Mechanical Engineers (ASME)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Temperature sensors
Polysilicon
Hydraulics
Pressure sensors
Fabrication
2005

Active sound transmission control for windows using carbon nanotube based transparent thin film speakers

Yu, X., Rajamani, R., Stelson, K. A. & Cui, T., Dec 1 2005, Proceedings of the ASME Dynamic Systems and Control Division 2005. 2 PART B ed. Vol. 74 DSC. p. 1857-1863 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Carbon nanotubes
Acoustic waves
Thin films
Actuators
Control systems

Development of transparent thin film speaker and its application for active sound transmission control through windows

Yu, X., Rajamani, R., Stelson, K. A. & Cui, T., Dec 1 2005, 19th National Conference on Noise Control Engineering 2005, Noise-Con 05. Vol. 1. p. 582-588 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

sound transmission
thin films
actuators
vinylidene
fluorides

Integrated pressure-flow-temperature sensor for hydraulic systems

Groepper, C., Cui, T., Li, P. Y. & Stelson, K. A., Dec 1 2005, American Society of Mechanical Engineers, The Fluid Power and Systems Technology Division, FPST. p. 183-192 10 p. (American Society of Mechanical Engineers, The Fluid Power and Systems Technology Division, FPST; vol. 12 FPST).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Temperature sensors
Hydraulics
Microelectronics
Sensors
Fluids
1998
3 Citations (Scopus)

Modeling and control of the in-situ thermoplastic composite tape-laying process

Sun, W. C., Mantell, S. C. & Stelson, K. A., Dec 1 1998, Proceedings of the 1998 American Control Conference, ACC 1998. p. 2170-2175 6 p. 703012. (Proceedings of the American Control Conference; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Tapes
Thermoplastics
Composite materials
Substrates
Temperature
8 Citations (Scopus)

Real-time sensing and control of resin flow in liquid injection molding processes

Parthasarathy, S., Mantell, S. C., Stelson, K. A., Bickerton, S. & Advani, S. G., Dec 1 1998, Proceedings of the 1998 American Control Conference, ACC 1998. p. 2181-2184 4 p. 703014. (Proceedings of the American Control Conference; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Resin transfer molding
Injection molding
Real time control
Resins
Liquids
1991
1 Citation (Scopus)

Compressible-flow modeling with pseudo bond graphs

Tan, J., Stelson, K. A. & Janni, K. A., Dec 1 1991, Proceedings of the American Control Conference. Anon (ed.). Publ by American Automatic Control Council, Vol. 2. p. 2083-2088a

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Compressible flow
Pipe flow
Flow of gases
Differential equations
1990

Approximate model to calculate foldover and strains during cold upsetting of cylinders. Part I. Formulation and evaluation of the foldover model

Ettouney, O. M. & Stelson, K. A., Dec 1 1990, Computer Modeling and Simulation of Manufacturing Processes. Singh, B., Im, Y. T., Haque, I. & Altan, C. (eds.). Publ by ASME, Vol. 20. p. 165-179 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction
Lubrication
Calibration
Finite element method
Geometry

Approximate model to calculate foldover and strains during cold upsetting of cylinders. Part II. Use of the foldover model to estimate friction

Ettouney, O. M. & Stelson, K. A., Dec 1 1990, Computer Modeling and Simulation of Manufacturing Processes. Singh, B., Im, Y. T., Haque, I. & Altan, C. (eds.). Publ by ASME, Vol. 20. p. 181-192 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Friction
Calibration
Finite element method

Control of the flexible automation of metal forming

Stelson, K. A., Dec 1 1990, Proc 5 IEEE Int Symp Intell Control 90. Publ by IEEE, p. 1071-1073 3 p. (Proc 5 IEEE Int Symp Intell Control 90).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Metal forming
Automation
Bending (forming)
Acoustic waves
1988
6 Citations (Scopus)

Bend allowance calculation in a flexibly automated sheet metal fabrication system

Pourboghrat, F. & Stelson, K. A., Dec 1 1988, Unknown Host Publication Title. Publ by American Soc of Mechanical Engineers (ASME), p. 999-1007 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sheet metal
Fabrication
Real time control
Strain hardening
1987
12 Citations (Scopus)

FLUID FLOW AND SOLIDIFICATION MODELING OF DIE CASTINGS.

Minaie, B., Stelson, K. A. & Voller, V. R., Dec 1 1987, ASME Mater Div Publ MD. Tseng, A. A. (ed.). ASME, Vol. 3. p. 35-49 15 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Die castings
Solidification
Flow of fluids
Die casting
Liquids
1986
1 Citation (Scopus)

MEASUREMENT OF THE INTERFACIAL STRESSES IN ROLLING USING THE ELASTIC DEFORMATION OF THE ROLL.

Meierhofer, D. J. & Stelson, K. A., Dec 1 1986, American Society of Mechanical Engineers, Production Engineering Division (Publication) PED. ASME (DSC v 4), Vol. 23. p. 1-17 17 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Elastic deformation
Cold rolling
Sensors
Strain gages
1984

MEASUREMENT OF THE PRESSURE AND FRICTIONAL STRESSES IN COLD ROLLING USING THE ELASTIC DEFORMATION OF THE ROLL.

Wang, S. L. & Stelson, K. A., Jan 1 1984, Unknown Host Publication Title. p. 355-364 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cold rolling
Elastic deformation
1 Citation (Scopus)

MODIFIED SLAB METHOD FOR AXISYMMETRIC UPSET FORGING.

Ettouney, O. M. & Stelson, K. A., Dec 1 1984, Manufacturing Engineering Transactions. North American Manufacturing Research Inst of SME, p. 133-140 8 p. (Manufacturing Engineering Transactions).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Forging
Stress concentration
Loads (forces)
1983

ADAPTIVE PRESSBRAKE CONTROL FOR STRAIN-HARDENING MATERIALS.

Stelson, K. A., Dec 1 1983, Unknown Host Publication Title. ASME, p. 159-170 12 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Strain hardening
3 Citations (Scopus)

NEW METHOD TO MEASURE NORMAL PRESSURE AND FRICTIONAL STRESSES IN THE ROLL GAP DURING COLD ROLLING.

Stelson, K. A., Dec 1 1983, Manufacturing Engineering Transactions. North American Manufacturing Research Inst of SME, 00001400, p. 259-264 6 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Cold rolling
1982
1 Citation (Scopus)

CLOSED-LOOP SHAPE CONTROL OF A ROLL-BENDING PROCESS.

Hardt, D. E., Roberts, M. A. & Stelson, K. A., Dec 1 1982, Unknown Host Publication Title. ASME, p. 17-29 13 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

REAL TIME IDENTIFICATION OF WORKPIECE MATERIAL CHARACTERISTICS FROM MEASUREMENT DURING BRAKEFORMING.

Stelson, K. A., Dec 1 1982, Unknown Host Publication Title. ASME, p. 31-52 22 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1981
2 Citations (Scopus)

ADAPTIVE PRESSBRAKE CONTROL USING AN ELECTRIC-PLASTIC MATERIAL MODEL.

Stelson, K. A. & Gossard, D. C., Dec 1 1981, Unknown Host Publication Title. IEEE, Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Microcomputers
Parameter estimation
Hydraulics
Plastics

MATERIAL ADAPTIVE CONTROL OF SHEET METAL ROLLING.

Hardt, D. E., Roberts, A. M. & Stelson, K. A., Dec 1 1981, Unknown Host Publication Title. IEEE, Vol. 2.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Sheet metal